701002 Dacor Range/Stove/Oven Timer Repair

Failure codes, problems, and resolutions for Dacor timer model # 701002

Dacor ERCs and Dacor stove clocks and timers Manufacturer :  Dacor
Part Number :  701002
Appliance Type :  Range/Stove/Oven
Color : 
Description :  Electronic Range/Oven Timer

 
 
Do you have a failed Dacor 701002 timer?
Click here:

We can repair or replace your faulty 701002 timer.
Request Appliance Timer Service

Electronic Range/Oven Timer timer Part Number 701002 is used in the following appliances

Recent Service Requests for Dacor Part Number 701002

CityModel NumberFailure CodeProblem DescriptionResolution
Los Altos, CaliforniaEcps130sNoneI have a working timer, but the display is very dim.Awaiting receipt of timer
Bowen Island, British ColumbiaRSD30SF1Power outage at house. Oven came back on, set time on clock, then F1 started coming on and beeping. I press cancel, but after 30 seconds or so F1 comes on again an starts beeping. Does not beep or come on if oven is functioningTimer inspected, no repairs necessary
Wenatchee, WashingtonRSD 30FiF1 poped up a few months ago. I removed the front panel and went through the tests. Put it back together and have not had the F1 code, and annoying beep beep, until today. The cancel button only turns it off for a few seconds.Awaiting receipt of timer
Carlton, MinnesotaRSD30F1The stove starts beeping and displays F1.Timer inspected, no repairs necessary
Great Neck, New YorkRSD30 DUAL FUEL GAS/ELECTF1GETS AN F1 PERIODICALLY BEEPS, I TURN OFF BREAKER, UNITIL I NEED TO USE THE OVEN AGAIN. OVEN WORKS FINETimer inspected, no repairs necessary
Piedmont, CaliforniaDacor CPS127N/AWhen you start it, the oven stays on for about 7 seconds and then goes off.Awaiting receipt of timer
Milwaukee, WisconsinRSD30F1I powered up my range, and I get an F1 code right away, the oven turns on, however it does not heat up, and the convection fan does not turn on.Awaiting receipt of timer
Coatesville, PennsylvaniaRSD30F1F1 error code with beeping. When cancel is pressed beeping stops but starts again momentarily. Can not clear code. Only way to stop it is to shut off power.Awaiting receipt of timer