Amana ERC Fault Codes


Glass link Electronic Range Control (ERC)

Fault CodeCondition/DescriptionResolution
Door flashing #0, 1, 2, 3Latch switch brokenReplace
Lock flashingLatch switch brokenReplace
F0Loss of safety signalReplace adapter board
F1Watchdog circuitRebuild Electronic Range Control (ERC)
F2Oven too hotReplace oven temperature sensor
F3 F4Open or shorted oven temperature sensorReplace oven temperature sensor
F7Shorted touch panelReplace glass panel
F9Motorized doorCheck latch
FFLock errorCheck switch and motor

Electronic Range Control (ERC) III / Relay board with separate board and push buttons

Fault CodeCondition/DescriptionResolution
F0Shorted push padReplace
F1Failed Electronic Range Control (ERC)Rebuild the controller
F2Oven too hotReplace oven temperature sensor
F3 F4Shorted or open oven temperature sensorReplace oven temperature sensor
F5, F6, F8Failed Electronic Range Control (ERC)Rebuild the Electronic Range Controller
F7Shorted or sticking buttonCheck glass alignment, replace touch panel if necessary
F9Door latch failureReplace door latch switch or assembly if necessary

Dual Convection Wall Oven

Fault CodeCondition/DescriptionResolution
F0Shorted touch padReplace touch pad
F1Electronic range control failureRebuild electronic range control (ERC)
F2Oven temperature 100 degrees over limitReplace oven temperature sensor
F3Shorted oven temperature sensorReplace oven temperature sensor
F4Open oven temperature sensorReplace oven temperature sensor
F6Electronic range control component failureRebuild electronic range control (ERC)
F7Failure detected in self-clean lock circuitryCheck door latch mechanism

"Big Oven" 5.1 cubic ft. (Sigma Touchmatic ERC)

Fault CodeCondition/DescriptionResolution
F0-0No ErrorInitial factory setting
F1-1Over temperature while cookingCheck oven temperature sensor and wiring first, rebuild control board if oven temperature sensor is good
F1-3Over temperature while cleaningCheck oven temperature sensor and wiring first, rebuild control board if oven temperature sensor is good
F1-5Cancel key input out of rangeRebuild control board
F1-7Keyboard disconnectedVerify wire connection is tight. Rebuild control board if failed
F1-8Shorted keyRebuild control board
F1-9Slave micro not functioningRebuild control board
F1-ACircuit board groundingRebuild control board
F1-CControl not calibratedRebuild control board
F1-ECircuit board data corruptionRebuild control board
F1-FCircuit board data corruptionRebuild control board
F1-HDoor switch input circuit failureCheck switch and wiring
F1-JLatch switch input circuit failureCheck switch and wiring
F3-1Oven temperature sensor or oven temperature sensor circuit failureCheck wire connections and oven temperature sensor
F9-1Auto latch will not lockCheck wiring, motor, and latch switch
F9-2Auto latch will not unlockCheck wiring, motor, and latch switch