WP5701M40660 Maytag Range/Stove/Oven Timer Repair

Failure codes, problems, and resolutions for Maytag timer model # WP5701M40660

Maytag ERCs and Maytag stove clocks and timers Manufacturer :  Maytag
Part Number :  WP5701M40660
Appliance Type :  Range/Stove/Oven
Color : 
Description :  Electronic Range/Oven Timer

Do you have a failed Maytag WP5701M40660 timer?
Click here:

We can repair or replace your faulty WP5701M40660 timer.
Request Appliance Timer Service

Recent Service Requests for Maytag Part Number WP5701M40660

CityModel NumberFailure CodeProblem DescriptionResolution
Kamloops, British ColumbiaMER6872BCWNo Failure CodeTop oven bake element receives no power. Oven door locks do not actuate "timed bake" function does not work when using both ovens.Repaired
hastings, Ontariomer6872bcwN/Alower bake element wont heat, wiring checks out good, only gets approx 40 volts to element. all other funtions operate properlyRepaired
Etobicoke, OntarioMER6872BCSunknownThis is a double oven range, bottom oven not working at all; top oven working good, and burner elements all working good. Would like to purchase replacement, either new or reconditioned.Repaired
Lyman, MaineMer6870aabN/AI just want a new / refurbished one.....if you want my old one after i replace it.....lets work that outRepaired
Edmonton, Albertamer6872bcbNoneOven will not come up to temperature as verified by oven themometer for both upper and lower oven. Testing temp sensor for both ovens measured within acceptable range of 1080-1090. Testing Elements came back to acceptable range for each element.Repaired
Airdrie, AlbertaMER6872BCWnoneBake element on upper oven does not power up. With bake the broil element in upper oven heats oven until temp reached then oven cools as bake element never heats. No current from timer board to bake element at back of oven. Wires from timer board, and elements all have proper conductivity. All of the other three elements receive current from board. Only one relay which would shut off all elements.Repaired
Airdrie, AlbertaMER6872BCWNAOnly problem is upper oven bake element not turning on. Board is not supplying current to this bake element at back of oven wiring. Conductive is good and matching on all elements, and good on wiring from board to upper oven bake element. All other heating components of oven and range work. There is one relay and it supports all 4 oven elements. Upper oven heats up with only broiler element and then cools once set temp is reached, as bake element never powers up.Repaired
Charlotte, North CarolinaMER6872BSnalower element (good) will not heat upAwaiting receipt of timer
Charlotte, North CarolinaMER6872BSnalower oven lower element will not heat up ( element is good.)Awaiting receipt of timer