3195182 Whirlpool Range (Stove, Oven) Timer Repair

Failure codes, problems, and resolutions for Whirlpool timer model # 3195182

Whirlpool ERCs and Whirlpool stove clocks and timers Manufacturer :  Whirlpool
Part Number :  3195182
Appliance Type :  Range (Stove, Oven)
Color : 
Description :  Timer erc control (black)

 
 
Do you have a failed Whirlpool 3195182 timer?
Click here:

We can repair or replace your faulty 3195182 timer.
Request Appliance Timer Service

Recent Service Requests for Whirlpool Part Number 3195182

CityModel NumberFailure CodeProblem DescriptionResolution
Hopewell, VirginiaRF376PXDWN/ANo error codes or anything visibleRepaired
Raleigh, North Carolinarf376pxdwN/A"DEAD" LED READOUTS. Note: I was not able to test for power being received at the timer. The oven is at a beach house and I don't have a voltmeter available.Repaired
Dublin, OhioRF376PXDN 1N/ATouch surface brokenAwaiting receipt of timer
sarasota, Floridarf376pxdq0N/Ato dim (cant see)Awaiting receipt of timer
Norfolk, Nebraskarf376pxdn1noneOven will not maintain temp have installed new sensor and also adjusted temp on board but cust continues to advised that when baking at temps between 325 and 350 does not bake properly food will either be burnt or not done enoughAwaiting receipt of timer
Rapid City, South DakotaRF376PXDNN/ATemp light and clock light are getting dim. Temp light is almost impossible to read.Beyond Repair
Laramie, WyomingRF375PXDWN/Acant see temp and not sure oven temp is correct. not even sure oven is heating correct temp need the control panel. could send old one to you but prefer to replace this one and then could give you old oneAwaiting receipt of timer
Mount Pleasant, MichiganN/AUnit was subject to a voltage spike from the power company. The burners still work fine, but the oven control board is damaged.Beyond Repair
Jacksonville, FloridaN/Abacklight not functioning - can't read oven temp.Awaiting receipt of timer
Nashville, TennesseeRF375PXSW-0N/ATimer was subjected to higher than normal voltage due to a backup generator problem. Though the timer was not field tested it is presumed that the transformer on the timer has been damaged. The timer is completely dead, no display evident.Repaired