3164627 Kenmore/Frigidaire/Electrolux Range/Stove/Oven Timer Repair

Failure codes, problems, and resolutions for Kenmore/Frigidaire/Electrolux timer model # 3164627

Kenmore ERCs and Kenmore stove clocks and timersFrigidaire ERCs and Frigidaire stove clocks and timersElectrolux ERCs and Electrolux stove clocks and timers Manufacturer :  Kenmore/Frigidaire/Electrolux
Part Number :  3164627
Appliance Type :  Range/Stove/Oven
Color : 
Description :  Electronic Range/Oven Timer

Do you have a failed Kenmore/Frigidaire/Electrolux 3164627 timer?
Click here:

We can repair or replace your faulty 3164627 timer.
Request Appliance Timer Service

Recent Service Requests for Kenmore/Frigidaire/Electrolux Part Number 3164627

CityModel NumberFailure CodeProblem DescriptionResolution
Seminary, Mississippi30" single wall ovenContractor lose causOne of the connectors to the board appears to have broken, causing it to short the board out and spark. Need new relay board.Awaiting receipt of timer
St. John's, Newfoundland and LabradorC970-441933NaLooking for replacement partAwaiting receipt of timer
Sault Ste Marie, Ontario970C670220NoneOven did not heat up past 175 degrees. Stove top still works fine.Repaired
Kamloops, British Columbia970-698380N/ANo power to oven elementsRepaired
Brigden, OntarioC970-440935N/AOven won’t heatRepaired
Winnipeg, Manitoba970C670220noneNo Oven Heat.Awaiting receipt of timer
London, OntarioKenmore EliteF10Run away temperature. Error F10. Disconnected power and retried. Same error.Repaired
Souris, Manitoba970C653120F15F15 . assuming power surge, I was not home at the time but the surge also destroyed 2 power bars. Top elements and closck work, oven does not, when pressed button for any oven function, F15 appears.Awaiting receipt of timer
Middle Sackville, Nova Scotia970-678595F10Oven run away tempAwaiting receipt of timer
st. john's, Newfoundland and Labradorc970-441933naBake oven sometimes dose not seem to work. When I check the voltage on the element it only reads 120v. Other times the oven runs hot, up to 550. Note that I use an oven thermometer to check temperature. Note also that P3 has loose pins. I couldn't remove the connector so I may have done that while trying to remove the connector. Instead I have to snip the wires.Repaired
Calgary, Alberta970-678432N/AThere was shock, sound like an explosion. The time is blank and doesn't respond to a touch. There is voltage to the board.Repaired
Calgary, Alberta970-678432N/AThere was shock, sound like an explosion. The time is blank and doesn't respond to a touch. There is voltage to the board.Repaired
Dieppe, New BrunswickRangeN/ADamagedAwaiting receipt of timer
Little Bay, Newfoundland and Labrador970-687-620N/AThe Oven was not heating up to temperature . Only slightly. when I removed the timer; the solder on the main connector the solder was melted from around one of the connects. repaired this and put back in the power came back on the Oven but when I trurned on bake the resistor melted, you can see the damage on the connector & relay board.Awaiting receipt of timer
Little Bay, Newfoundland and Labrador970-687-620N/Aoven only heats to 125 degrees The relay on the relay board was blown out. Looking for the relay board P/No. 3164627Awaiting receipt of timer
Little Bay, Newfoundland and Labrador970-687-620N/AOven only heat to 150 degreesAwaiting receipt of timer
High River, Albertagallery seriesN/ANo power. Main power terminal friedAwaiting receipt of timer
Fountain Inn, South CarolinaN/ASurface works/oven don’tAwaiting receipt of timer
Nakusp, British Columbia970C670121noneoven will not heat. No failure codes. Back of board shows obvious burn marks.Repaired
Fort Saskatchewan, AlbertaCPLEFMZ9GCGnoneBurnt resistorAwaiting receipt of timer