Montreal, Quebec | fgf353 | n/a | 7 Segment display is very dim, even after cleaning between display and display window. | Awaiting receipt of timer |
Armstrong, Ontario | FGF376CESK | N/A | power surge blew transformer and maybe related circuitry. | Repaired |
Armstrong, Ontario | FGF376CESK | N/A | Dim display | Repaired |
Kamloops, British Columbia | | N/A | Temp does not stay selected after you turn on the oven. Sometimes it turns off right away, or it may stay on. | Awaiting receipt of timer |
Harwich Port, Massachusetts | fgf376cjsb | N/A | dead | Awaiting receipt of timer |
richmond, British Columbia | 970-336922, Gas stove | n/a | Display brightness is low and unreadable. This clock/timer was repaired once before by you in 2010, but same problem repeated. | Awaiting receipt of timer |
Waco, Texas | FGF376CESM | N/A | Existing timer display is too faded to read | Awaiting receipt of timer |
Westfield, Massachusetts | FGF376CXASA | F-1 | No Display on clock and unit won't respond to keypad inputs | Repaired |
Kitchener, Ontario | FGF353BADF | no code | first of all, this is a gas range. The timer display lights up partially, but clock and timer does not work. Any attempt to set the clock or timer causes the display to go black until the "clear" button is pushed. The over does not work, but the burners continue to function normally. | Awaiting receipt of timer |
Canton, Illinois | FGF374CCSJ | F1 | Beeps then F1 error code show on display. There was a loud electrical type of pop in back before this error showed. | Repaired |
windsor, Ontario | fgf376cebp | f1 | beeep beep beep f1 error if not repairable send refurbished timer plezz | Repaired |
Quesnel, British Columbia | AP 2125105 | N/A | Screen faded to become impossible to read... | Beyond Repair |
north tonawanda, New York | | N/A | no display,no fault codes, burners and oven light still work. | Awaiting receipt of timer |
Quesnel, British Columbia | AP 2125105 | N/A | Screen faded to become impossible to read... | Beyond Repair |
Regina, Saskatchewan | | dead | After a power outage last summer, the timer was dead when the power came back on . . . suspecting a power surge or brownout when SaskPower turned our area up. The stove was not grounded at the time (old house with nob and tube wiring) but has been converted this spring to proper 100 AMP service with grounded plugs. | Repaired |
Niagara falls, Ontario | frigidaire | none | Gas oven, white face, while baking door locked, now has no function other than time and door locked appears on display | Timer inspected, no repairs necessary |
Niagara falls, Ontario | frigidaire | none | Gas oven, white face, while baking door locked, now has no function other than time and door locked appears on display | Timer inspected, no repairs necessary |
Court, Ontario | FGF376CJBB | F1 | F1 always - check lock switches back to cotroller alos swapped with good controller and code goes a away. | Repaired |
richmond, British Columbia | Gas sove, Model # 970-336922 | N/A | Diplay is blank. 115VAC power & ground were checked OK. 2 of the black plastic mounting holes have damages but I could mount the timer using flat washer, so you do not have to fix if that cause any problem. Please let me know if you have replacement rebuilt timer ( P/N 316080011R) or not also. Thank you.
Yoichi | Repaired |
Niagara falls, Ontario | frigidaire | none | door locked during bake remaims door locked in display with no function | Timer inspected, no repairs necessary |