316462823 Kenmore Range/Stove/Oven Timer

Failure codes, problems, and resolutions for Kenmore timer model # 316462823

Kenmore ERCs and Kenmore stove clocks and timers Manufacturer :  Kenmore
Part Number :  316462823
Appliance Type :  Range/Stove/Oven
Color : 
Description :  Electronic Range/Oven Timer

Do you have a failed Kenmore 316462823 timer?
Click here:

We can repair or replace your faulty 316462823 timer.
Request Appliance Timer Service

Recent Service Requests for Kenmore Part Number 316462823

CityManufacturerModel NumberFailure CodeProblem DescriptionResolution
langley, British ColumbiaKenmorec970440933N/Aburnt resistor on power pcbReplaced with reconditioned timer
Winnipeg, ManitobaKenmoreC970-440994F20This control board was repaired approximately two years ago by an electrical engineer. Two relays, a resistor and a transistor were replaced in june 2014. Now, none of the stovetop elements nor the oven will heat up. The display "works". F20 is a communication error between the ESEC and EOC boards. The cable between the two boards has continuity (verified by repairman). The repairman "guesses" from experience that the problem lies with the EOC. If you can, please supply the "Frigidaire equivalent" model number of the range for future reference. Thank you.Repaired
Ottawa, OntarioKenmoreC970-440994F10Bake function does not work and now the oven has no temp control. Stove indicates when it is up to the desired temperature but does not stop. Temp increases uncontrollably.Repaired
Stouffville, OntarioKenmoreC970-440993N/ABake Element Not Receiving Power.Awaiting receipt of timer
London, OntarioKenmoreC970-440935N/AOven does not work.Awaiting receipt of timer
London, OntarioKenmoreN/AOven does not workAwaiting receipt of timer
Conception Bay South, Newfoundland and LabradorKenmoreC970-440931 or 970440931noneoven/broiler will not heat.Awaiting receipt of timer
Trois-Rivières, QuébecKenmoreN/AOven defect, a company came to repair and told me I had to replace the timer.Awaiting receipt of timer
Trois-Rivières, QuébecKenmoreN/AOven defect, a company came to repair and told me I had to replace the timer.Awaiting receipt of timer
saint augustin de desmaures, QuebecKenmorec970-440935nonesometimes preheat takes 30-45 minutes to reach 350f. sometime it beeps like it's preheated and it's 150f away from the set temp. sometime it works ok. 3 elements are tested ok, temp sensor new. same problemRepaired
Edmonton, AlbertaElectroluxF10F10 code is thrown, and self clean fan comes on and unit beepsRepaired
Waterloo, OntarioKenmorec970-4409F10Baked food is burnt.Awaiting receipt of timer
Saskatoon, SaskatchewanKenmoreC970-440935F10Runaway oven heatRepaired
Waterloo, OntarioKenmoreC970-4409F10During the bake cycle, F10 code appears...with beeping.....the broil elements comes on.Awaiting receipt of timer
Corunna, OntarioKenmoreC970-440935No code, but overheaOven started overheating and over cooking. Tested it with oven thermometer and confirmed that the oven would beep as designed when the set temp was reached, but would not stop heating, even though element display showed no burners were on. Tested temp probe at probe end and from board...resistance ok as per the chart in the manual. Removed board and noticed R1 resistor looks fried.Repaired
Osoyoos, British ColumbiaKenmoreC970440935NoneThe oven element does NOT heat up.
The broiler element DOES heat up.
I believe that the convection element does heat up.

The warmer drawer DOES heat up
The dough proof feature does NOT work.
Awaiting receipt of timer
Québec, QuebecElectroluxC970-440934N/ABroil won't workAwaiting receipt of timer
Saint-Laurent, QuebecElectroluxC970-440981N/ABurned resistance, bad contacts, erratic behaviorRepaired
Fredericton, New BrunswickKenmoreC970-440935F!0Oven over heats then shuts down F10Repaired
Beaumont, AlbertaKenmorec970-440933N/ANone of the 3 elements heat up,Awaiting receipt of timer
Corunna, OntarioKenmoreC970-440935n/aBroiler element won't turn off. When preheating, I can hear the relays clicking and the display shows the burners turning on and off, but the broiler element just stays on regardless. It does not turn off when oven reaches set temp.Awaiting receipt of timer