71002959 Jenn-Air Range/Stove/Oven Timer

Failure codes, problems, and resolutions for Jenn-Air timer model # 71002959

Jenn Air ERCs and Jenn Air stove clocks and timers Manufacturer :  Jenn-Air
Part Number :  71002959
Appliance Type :  Range/Stove/Oven
Color :  Black
Description :  Clock

 
 
Do you have a failed Jenn-Air 71002959 timer?
Click here:

We can repair or replace your faulty 71002959 timer.
Request Appliance Timer Service

Recent Service Requests


CityManufacturerModel NumberPart NumberFailure CodeProblem DescriptionResolution
Eugene, OregonJenn-AirSVD4600P71002959N/AThe 71002959 oven control board clock time flashes on and off, oven shut down. Indicater power shut off. I would like to repair or replace part thanks.Awaiting receipt of timer
Nashville, TennesseeJenn-AirSVD48600P71002959none - intermittent timer/control comes on/off intermittentlyRepaired
Tarboro, North CarolinaJenn-Air71002959BlankThe timer on front of stove has gone completely out -screen is blackRepaired
Burlington, ConnecticutJenn-AirSVD48600P71002959N/AClock and all other buttons stopped workingRepaired
Eagan, MinnesotaJenn-Air71002959noneno power coming off of timer board. Oven wont heatAwaiting receipt of timer
Eagan, MinnesotaJenn-Air71002959Nonetimer is lit, but fails to pass power to heat stove. At least thats what the tech said.Awaiting receipt of timer
Beasley/ Phone 250-551-2798, British ColumbiaJenn-AirSVD48600PC71002959N/ADoes Not Stay On . Digital Screen.Repaired
Niskayuna, New YorkJenn-AirSvd48600p71002959N/AOven turns on but doesn't heat up to desired temp. Very slow to heat up to whatever minimal temperature it does reach. Broiler seems to work normally. Local repair guy identified controller as the problem,but none of his parts suppliers can get the part.Repaired
Raleigh, North CarolinaJenn-AirSVD48600P71002959F-3F-3 error message repeatedly blinks and cuts off the oven. Ultimately, it will not turn off for oven use.Repaired
Seattle, WashingtonJenn-AirSDV48600P71002959NoneThe oven and broiler just click and does not go on.Repaired
Raleigh, North CarolinaJenn-AirSVD48600P71002959F-3F-3 error message repeatedly blinks and cuts off the oven. Ultimately, it will not turn off for oven use.Repaired
Raleigh, North CarolinaJenn-AirSVD48600P71002959F-3F-3 error message repeatedly blinks and cuts off the oven. Ultimately, it will not turn off for oven use.Repaired
Elgin, South CarolinaJenn-Air71002959No codeOven temp will not go above 350 degreesAwaiting receipt of timer
Dallas, TexasJenn-Airsvd48600p71002959N/Atimer overheated.Timer inspected, no repairs necessary
Lacey, WashingtonJenn-AirSVD48600P71002959blankno display, no operationAwaiting receipt of timer
Colebrook, New HampshireJenn-AirSVD48600P71002959N/AOn occasion the broil element will stay on and not shut down. Customer will shut breaker off and then element will not come back on until called for again.Timer inspected, no repairs necessary
St-Félix de Valois, QuébecJenn-AirSVD48600PC71002959N/ADEAD/ DO NOT WORKAwaiting receipt of timer
Portland, OregonJenn-AirSVD486OOP71002959N/AOven will not come to temperature. For awhile, convect bake worked, but now it won't heat up at all. No error code shows. The range works.Repaired
glastonbury, ConnecticutJenn-AirSVD48600P71002959N/AOVEN WON'T HEAT. FAN NOT WORKINGRepaired
Hatfield, MassachusettsJenn-AirSVD48600P71002959N/ANeither bake nor broil selections function (no response). Clock and timer still work.Repaired
Cheektowaga, New YorkJenn-Airsvd48600p71002959F!beeping sound after brief usage and error code of f1 appears. OEM part # is 71002959 and the replacement # is 5700m662-60Awaiting receipt of timer
Wantagh, New YorkJenn-Airsvd48600p71002959N/Aclock no response of controlsAwaiting receipt of timer
Walpole, MaineJenn-Air71002959Bake/ and Broil haveBake and broil have no powerAwaiting receipt of timer
Hatfield, MassachusettsJenn-AirSVD48600P71002959N/ANeither bake nor broil selections function (no response). Clock and timer still work.Repaired
Hobart, WisconsinJenn-AirSVD48600P71002959N/ADoes not heat on bake cycle, broil cycle works.Awaiting receipt of timer
SANTA CRUZ, New MexicoJenn-AirSVD48600P71002959noneNO CONTROLS, NO CLOCK, NO OVEN, BUT CONVECTION FAN ON ALL THE TIME.Repaired
Kapaa, HawaiiJenn-AirSVD48600P71002959N/AOven/broil does'nt workAwaiting receipt of timer
Abbotsford, British ColumbiaJenn-AirSVD48600PC71002959N/AThe "up arrow" on the controls does not work, only the "down arrow". I am unable to use time, increase oven temperature above 350 (the oven temp starts at 350 and then is adjusted by arrow buttons).Awaiting receipt of timer
JAMAICA PLAIN, MassachusettsJenn-AirSVD48600P71002959N/ANO BAKERepaired
Green Bay, WisconsinJenn-AirSVD48600P71002959N/AOven does not heat to proper temperatureAwaiting receipt of timer
Rochester Hills, MichiganJenn-AirSVD48600P71002959N/AOven (bottom) heating element has no signal (element tested and works)Repaired
Hamilton, OhioJenn-Airsvd48600p71002959N/Ano funtions foil open on back of board by bake relay happened when bake element blew outAwaiting receipt of timer
Brookhaven, GeorgiaJenn-AirSVD78600P71002959F3Oven is functional. F3 flashes after a while. This started after clean mode was used.Repaired
Hamiltin, OhioJenn-Airsvd48600p71002959N/Afoil open on back of board by bake relay happened when bake element blew outAwaiting receipt of timer
Tyrone, PennsylvaniaJenn-AirSVD48600P71002959no code--oven will nClock and timer working. Oven will not heat to temp. Local repair man says it is this part malfunctioningRepaired
Delaware, OntarioJenn-Airsvd48600pc71002959F3WOKE UP IN MORNING,COOLING FAN RUNNING,TRIED PUSHING BUTTONS ERROR CODE F3 APPARENTLY THAT MEANS OPEN/SHORTED TEMP SENSOR.RESTE BREAKER COOLING FAN SHUT OFF STILL F3 CODE AND BEEPING CONTROL PANEL.TESTED SENSOR WITH METER 1078 OHMS AT ROOM TEMP RESISTANCE INCREASED WITH TEMP. INCREASE .HAVE TO HAVE DOWNDRAFT RANGE CANT AFFORD NEW ONE PLEASE PLEASE REPAIR THIS TIMER.Repaired
Seattle, WashingtonJenn-AirSVD48600P71002959NoneAll aspects of the control panel work fine except the elements in the oven do not turn on. The repair man said to problem is in the control panel as there is a something in the panel that has to work for the baking and broiling elements to turn on. He did remove and check the internal fuse and it works fine.Repaired
Prescott, ArizonaJenn-AirSVD48600P71002959N/ARelays clicking, no bake, no broilRepaired
Newburyport, MassachusettsJenn-AirSVD48600P71002959?None of the oven functions workRepaired
Elgin, South CarolinaJenn-Air71002959N/AUp down oven temp not workingAwaiting receipt of timer
Delaware, OntarioJenn-Airsvd48600pc71002959f3f3 error code-temp sensor open/shorted. tested sensor its good. 1078 ohms at room temp. need new clockRepaired
Annapolis, MarylandJenn-AirSUD48600671002959doesn't relay turn oThe over does not go above 100 degreesRepaired
Columbus, OhioJenn-Airsvd48600p71002959-----Control unit nonresponsive. Will not light up. Range works just fine but there is no ability to use the oven. Fan/lights work when powered but they seem to be independent of the control unit.Beyond Repair
Olds, AlbertaJenn-AirSVD48600PC71002959N/AClock flashes continually. Oven will start to warm up but then shuts down. Time cook light also shuts down.Repaired
KAMLOOPS, British ColumbiaJenn-Air71002959N/AOVEN WILL NOT TURN ONRepaired
farmington hills, MichiganJenn-Airsvd48600p71002959wont light upcame home and went to cook noticed timer was not lit.oven does not work it is electric the stove part works it is gas.i checked for voltage at timer using the wire diagram to the best of my ability it looks good i was going to manually push down on the two relays that the covers can be removed but did not want more damage thanks.Repaired
washington, MissouriJenn-Airsvd48600p71002959noneOven cooks unevenly but elements seems to work fine. Never runs correctly but seems like self cleaning does. Food burns on bottom & front to back is off. Brother-in-law is electrician says elements are good but board probably isn'tRepaired
SAULT STE. MARIE, OntarioJenn-AirSVD48600PC71002959N/ARANGE NOT TURNING ONRepaired
Chester, VermontJenn-AirSVD48600P71002959N/AThe regular Bake and Convection Bake functions do not get to temperature selected. For example, if you set the oven to 350 degrees, it takes an extraordinary amount of time to get to 260 degrees, and then it will go no higher. The element was tested and is OK and power voltage tested OK to the element. The Broiler functions properly.Repaired
Louisville, KentuckyJenn-AirSVD48600P71002959BlankIt does not turn on at all. The face is blankAwaiting receipt of timer
Louisville, KentuckyJenn-AirSVD48600P71002959BlankIt does not turn on at all. The face is blankAwaiting receipt of timer
Sault Ste. Marie, OntarioJenn-AirSvd48600pc71002959N/AOven doesn't workAwaiting receipt of timer
Nanaimo, British ColumbiaJenn-AirSVD48600PC71002959N/AOven will not heat in any mode.Awaiting receipt of timer
Kingwood, TexasJenn-AirSVD48600P7100-2959N/AMy oven touchpad went out and cannot be replaced. I am looking for a replacement.Awaiting receipt of timer
Guelph, OntarioJenn-AirSVD48600PC71002959noneOven does not heat. Everything else is good, except no output from electronic control.Repaired
candiac, QuébecJenn-Airsvd48600pc71002959F3, F5 or 6over starts but the temperature doesn't go up and when it does we get an error messageRepaired
Dublin, OhioJenn-AirSVD48600P71002959F-3Oven turns on will stay on for a while and then F3 error comes on (beeping and blinking) and turns oven off.Awaiting receipt of timer
Lavaltrie, QuebecJenn-AirSVD48600PC71002959N/ALED DISPLAY DONT LIGHT
CAN NOT SET OVEN TEMPERATURE
Awaiting receipt of timer
Belmont, MassachusettsJenn-AirSVD48600P71002959N/AThe Arrow Up button doesn't work. As a result we cannot increase the temp to more than the default of 350FRepaired
Louisville, KentuckyJenn-AirSVD48600P71002959Does not turn on.Does not power on.Beyond Repair
Highland, MichiganJenn-AirSVD48600P71002959N/AOven setting clears and stops for a few minutes then the blank display returns to normal. the oven heating stops.Awaiting receipt of timer
SPRINGFIELD, MissouriJenn-AirDVD48600P71002959NONEOVEN DOES NOT WORK AT ALL. TOP GAS BURNERS,
FAN AND OVEN LIGHT WORK FINE. OVEN ELEMENTS
DO NOT WORK AND CLOCK AND CONTROLS DO NOT
WORK EITHER.
Repaired
Bainbridge Island, WashingtonJenn-AirSVD48600P71002959N/AThe oven will seem to work fine, start (allow selection of convection methods), even cook for a period of time then will no longer maintain temp, clock time will flash as if power was lost then restored or oven will shut down (indicating no power at all). Might be temp related as system will restore after a short wait, but likely repeat (intermittent) or not. I would like to repair or replace part thanks.Awaiting receipt of timer
Saskatoon, SaskatchewanJenn-AirSVD48600P71002959N/APanel shut down while oven works suddenly and works again afterRepaired
patterson, New YorkJenn-AirSVD48600P71002959N/Anot able to adjust oven temperature with ''UP'' arrow on control panelAwaiting receipt of timer
brampton, OntarioJenn-Airsvd48600p71002959No codesThere are no error codes, the upper and lower heating elements in the oven will not heat up at all. Every 30 seconds or so there is a clicking noise as if the oven is heating up but it does not. I had this same problem approx 10 years ago and replaced the timer and all was good. I am hoping the problem is similar.Repaired
Saskatoon, SaskatchewanJenn-AirSVD48600PC71002959N/A - tech advises BBoth bake and broil heat / temperature commands appear in screen, but are not received by oven elements, as no heat in oven from either command.Repaired
DRUMMONDVILLE, QuebecWhirlpoolSVD48600PC71002959N/AThe oven element is not working but I checked the element itself and it's good. Therefore, I assume it's the control board.Beyond Repair
Caledon East, OntarioJenn-AirSVD48600PC71002959Up arrow button doesThe up arrow for oven temperature doesn’t work. Max temperature 350 which is default when turned on.Awaiting receipt of timer
DRUMMONDVILLE, QuebecWhirlpoolJenn-Air Range SVD48600PC71002959N/AEverything works fine except the oven element. The element itself has been checked out and it's good. The broil element works fine as well. I therefore assume it's the timerRepaired
Grafton, IllinoisJenn-AirSVD48600P71002959N/Ano displayAwaiting receipt of timer
LOVELAND, OhioJenn-AirSVD48600P71002959DIDN'T SEE ONEBROKEN MALE CONNECT ON CONTROL PANEL I BROKE REMOVING AND OVEN WON'T WORK BUT HEATING ELEMENT IS GOOD . PLUS UP ARROW BUTTON WILL NOT WORK AT ALL ADJUSTING CLOCK OR ANYTHING. WHEN TURN OVEN ON ARROW TO ADJUST UP DIDN'T WORK AND DON'T THINK IT WAS EVEN GETTING WARM.Repaired
Olds, AlbertaJenn-AirSVD48600PC71002959N/AActual oven temperature is much below the timer settings and readings. At 350 degree setting,oven is about 280. At 425 it is about 360 degrees. Sometimes the temperature drops sharply.

This unit was repaired by you in 2015 and is under warranty.
Timer inspected, no repairs necessary
Portland, OregonJenn-AirSVD-48600p71002959F3Error code F3 flashes and shuts down oven. Replaced sensor but didn't fix issue.Awaiting receipt of timer
charlotte, North CarolinaJenn-AirSVD48600P, 18459574AW71002959doesn't heat up abovHI: I CANNOT find this part anywhere online and have no clue how to un-install it to repair. can anyone help?Repaired
Olds, AlbertaJenn-AirSVD48600PC71002959N/AThis unit was sent in May 2018 because of intermittent baking temperature problems, mainly below temperature. Resulted in items being under-baked but top being burnt. You found no problems and returned it.
The problems remain even when oven sensor was replaced.
Talked with Howard Simons on June 7. He said that you folks would replace the bake relay. He thought that, because the problem is intermittent, a problem with that relay may have not shown up last time. We would like to have the roast relay replaced at the same time.The unit is under warranty
Repaired
Thornhill, OntarioJenn-Airsvd48600pc71002959nonoven runs all the time and does not spot heating.
i am not sure if it's 71002959, or 71002035.
most likely the main timer is the problem but i would like to make sure.
please contact me at 6478770531
Repaired
Highland Park, IllinoisJenn-Air115359745U71002959nathe coil was burning, after we replaced the coil and turned breaker back on the digital display was not working on the rangeBeyond Repair
Moultonborough, New HampshireJenn-AirSVD48600P71002959timer won't setTimer will not setRepaired
Seattle, WashingtonJenn-AirJenn -Air SVD48600p#71002959"F3" temp code and aWhen oven on for a period of time, "F3 error, and alarm. Temperature sensor replaced 11/21/2018 and same error came on next day upon using oven.Repaired
Braintree, MassachusettsJenn-AirSvd48600p71002959N/AWhole panel Shuts off frequently and clock flashes.Awaiting receipt of timer
Putnam Valley, New YorkJenn-AirSVD48800P71002959No PowerTimer is blank/no power and does not respond to inputs from keysBeyond Repair
seattle, WashingtonJenn-Airsvd48600p71002959doesn't work on bakebake button does not workAwaiting receipt of timer
South Barre, VermontJenn-AirSVD48600P71002959none - intermittentRandom intermittent disruption of clock and oven functions. Light tapping of housing sometimes returns function. Sometimes functions completely normally, sometimes the readout is blank.Repaired
Esko, MinnesotaJenn-AirSVD48600P71002959F3F3 Error code after using oven for about 25-35 minutes. Tried replacing the oven temperature sensor which didn’t fix the problem.Repaired
Esko, MinnesotaJenn-AirSVD48600P71002959F3F3 Error code after using oven for about 25-35 minutes. Tried replacing the oven temperature sensor which didn’t fix the problem.Repaired
Esko, MinnesotaJenn-AirSVD48600P71002959F3F3 code while oven is heating up to temperature. I’ve replaced the oven temperature sensor as well but it didn’t fix the problem.Repaired
Courtice, OntarioJenn-AirSVD48600PC71002959no error code just sThe control cuts out and goes black when in bake mode when the temperature is increasing beyond 225 dF. We push off button several times then the screen lights up push bake and continues increasing the temperature unit it cuts out again and repeats. Have tried using the range vent fan hoping to cool the electronic board but does not always have an effect.Repaired
Fayetteville, GeorgiaJenn-AirSVD48600P71002959F3Would like a reconditioned timer. Timer is not repairableAwaiting receipt of timer
Toronto, OntarioMaytagJennAir SVD48600PC71002959N/ALooking to replace the control board of my oven. Everything with the oven works find except one button on the interface - the up arrow on the upper right side of the panel (see pic at link below).

https://www.rcappliancepartsimages.com/dbImages/i/00012580/Oven-Control-Board-5700M662-60--03954095.jpg

Do you have this part?

Thank you
Awaiting receipt of timer
Black Mountain, North CarolinaJenn-AirSVD48600P71002959noneOven doesn't work at all. The clock light doesn't work nor does any of the other touch buttons. when press bake, it shows up as 00000 or 8888. you cannot read it at all. nothing happens.Beyond Repair
Laval, QuebecJenn-AirSVD48600P71002959not availableElectric oven no longer turns on.Beyond Repair
NORTH CANTON, OhioJenn-AirSVD48600P71002959n/aoven scroll arrows not workingAwaiting receipt of timer
Goffstown, New HampshireJenn-AirSVD48600P71002959no error code,no error but it started with the up temp button not working, then the next thing was the clock would stop working and just blink, the a couple of times the stove would just shut off during baking.Beyond Repair
toronto, OntarioJenn-Airsvd48600p71002959complete shutdownIt is power offAwaiting receipt of timer
Ajax, OntarioJenn-AirSVD48600PC71002959temp UP button not rtemp UP button does not respondAwaiting receipt of timer