WB27K5046 General Electric Range (Stove, Oven) Timer

Failure codes, problems, and resolutions for General Electric timer model # WB27K5046

General Electric (GE) ERCs and General Electric (GE) stove clocks and timers Manufacturer :  General Electric
Part Number :  WB27K5046
Appliance Type :  Range (Stove, Oven)
Color : 
Description :  Electronic clock control (part number WB27K5046 replaced with WB27K5203)

 
 
Do you have a failed General Electric WB27K5046 timer?
Click here:

We can repair or replace your faulty WB27K5046 timer.
Request Appliance Timer Service

Recent Service Requests for General Electric Part Number WB27K5046

CityManufacturerModel NumberFailure CodeProblem DescriptionResolution
Wellfleet, MassachusettsGEnoneKeypad seems to function properly, allowing all settings, but elements do not heat up. Display returns to the clock display after about 30 seconds, and the setting for the oven temperature disappears. Can sometimes get the oven to work if two keypad buttons are depressed together, and then just the desired one is depressed alone. If a clicking noise is heard as the keypad is depressed, the oven will fail to function as above. If that noise is absent, the elements work properly.Repaired
Beverly Hills, MichiganGeneral ElectricMonogram Built-In Wall Ovennone shownThe bake element does not power up. The temperature will indicate 100 deg and stay there. All other functions work. This is a replacement board for my original, which would not clean. I put the original back in and the bake does work with the old board so it seems to me it is the board.Beyond Repair
Stanton, MichiganGeneral ElectricJKP17WOP2WGN/APlease contact us if not repairable and we will decide at that time what action to take with the timer, ask for Greg.

Oven won't heat.
Beyond Repair
Vista, CaliforniaGeneral ElectricGE Profile JKP17W0P3WGF1 & Dameged DisplayProblems started with F1 code. Found C25 had leaked. Cleaning board fixed F1 problem. All key functions worked but relays would not turn on. Accidently applied 20vac to display filament. Keys/beep/lamp relay all still work but no display.Awaiting receipt of timer
Vista, CaliforniaGeneral ElectricGE ProfileN/ARelays will not turn on - otherwize ok
Display tube damaged on removal
Awaiting receipt of timer
Wapwallopen, PennsylvaniaGeneral ElectricJKP16G0P4BGnoneworks ok in broil, but in bake or convect bake the control accepts the request but the relays never kick in and it reverts back to ready mode after 15 to 60 secondsTimer inspected, no repairs necessary
Shelbyville, KentuckyGeneral ElectricJKP16GOP2BGN/AOven will not heat up on Bake - Service Man said it is the clock and the part is no longer availableRepaired
Hilliard, OhioGeneral ElectricJKP16GP2BGF3The F3 code is intermittent, the card did experience a ground short one year ago but worked well until a week ago. That is why you will see new soldered wire on the board since the foiled stips were damaged.

I replaced the temperature sensor, thinking it was bad since I thought I could impact the failure by using a heater to heat the sensor. A new temperature sensor did not clear the F3 code.
Beyond Repair
Shelbyville, KentuckyGeneral ElectricJKP16GOP2BGN/AOven will not heat up on Bake - Service Man said it is the clock and the part is no longer availableRepaired
Shelbyville, KentuckyGeneral ElectricJKP16GOP2BGN/AOven will not heat up on Bake - Service Man said it is the clock and the part is no longer availableRepaired
Lehighton, PennsylvaniaSears9114703990F1OVEN BEEPS UNTILL POWER IS TURNED OFF. DOES NOT APPEAR TO BE KEYPAD AS I FOLLOWED INSTRUCTONS BY MR. SIMONSRepaired
Minneapolis, MinnesotaGeneral ElectricN/AOven shuts off after a couple of minutes.Beyond Repair
Pineville, North CarolinaGeneral ElectricJKP17WOP3WGN/ATurn oven on - begins to preheat and then turns back off.Beyond Repair
Cotati, CaliforniaGeneral ElectricDeadDead. Every timer other than the WB27K5046 we are giving to you for the $10 discount per timer.Beyond Repair
seminole, FloridaGeneral ElectricGE ProfileF1 I thinkDoes not work at all,Display lights up and when you set temp iit just shuts off after about 30 seconds.Beyond Repair
Newaygo, MichiganGeneral ElectricJKP17WOP2WGN/AOven turns on then turns off after a couple minutesRepaired
Bellevue, WashingtonGeneral ElectricJ KP17WOP2WGF1Oven beeps and displays F1 Error CodeRepaired
Titusville, FloridaGeneral ElectricJKP17WP2N/AInoperative. When the desired oven temp is selected, instead of starting to heat, it will just shut off. Also, previously (when it did operate properly), when convection bake or broil was selected, I would smell circuit board or some electronic component getting hot, so i would not use the oven in that mode.Repaired
san luis obispo,ca, CaliforniaGeneral Electricjkp17wop2wno bakedoes not heat on bakeAwaiting receipt of timer
san luis obispo,ca, CaliforniaGeneral Electricjkp17wop2wno bakedoes not heat on bakeAwaiting receipt of timer
Millen, GeorgiaGeneral ElectricJKP17W0P2WGNoneCurrently display is blank with no functionality of the push buttons. Started out going blank, then hours later would come back on. Reset time and hours later it would not be correct. Sometimes the display would go blank and the oven interior light would come on and not go off. Last time it worked, we were cooking in the oven and it shut off in the middle of the cook time. It has not worked since.Repaired
Phoenix, ArizonaGeneral ElectricJKP17WP2WGN/AOven element does not stay on.Awaiting receipt of timer
Los Gatos, CaliforniaGeneral ElectricJKP17WOP3WGunknownControl panel is non-functional. Only the oven light tuns on when the oven door is opened.Timer inspected, no repairs necessary
New York, New YorkGeneral ElectricZEK736GPnoneOven will not stay on -- when I turn it on, it only stays on for about 30-60 seconds and then clicks off.Repaired
New York, New YorkGeneral ElectricZEK736GPN/ATimer display works, but when the oven is turned on, it turns off after only a minute or two. Oven will not stay on.

I have two identical ovens and you just fixed the timer for the first. This is the second with the same problem.
Repaired
ahwahnee, CaliforniaGeneral Electricjkp17w0p3wgN/Aset bake or broil and it turns its self back off. with multiple tries it will stay on.Awaiting receipt of timer
San Carlos, CaliforniaGeneral ElectricJKP16GOP2BGNONEOVEN DOES NOT REGULATE TEMPERATURE ON SETTING VALUE OF DISPLAY. WHEN TEMP IS SET TO 425F, TEMPERATURE IN OVEN GOES TO 460F. CHECKED WITH FLUKE TEMPERATURE METER. IT EITHER BURNS FOOD OR UNDERCOOKS. CHECKED TEMPERATURE SENSOR AND IT READS 1,1200 OHMS AT 70F AMBIENT TEMPERATURE. WHEN HEATED WITH AIR GUN TEMPERATURE RISES TO 1,600 OHMS.Repaired
CLAREMORE, OklahomaGeneral ElectricJKP17WOP3WGN/ABOARD SHUTS DOWN WITHIN MINUTES OF STARTING PREHEATRepaired
LAMARQUE, TexasGeneral ElectricJKP18AS1AAF 1AFTER RE SET, CONTINUES F 1Repaired
Allentown, PennsylvaniaGeneral ElectricJKP16GP3BGN/Aconvection, fan turns on but will not heat
broiler not working at all
Repaired
North Hollywood, CaliforniaGeneral ElectricN/ABroken TimerAwaiting receipt of timer
West Covina, CaliforniaGeneral ElectricJKP 17WOP3WGNoneOven does not heat. Relay clicks, but no heat.
Lights, clock and keypad seem fine.
My appliance serviceman said the "computer" is problem and parts no longer available.
If new part is unavailable-- will take reconditioned.
Awaiting receipt of timer
Montague, MichiganGeneral ElectricJKP16G0P2BGF1Non-responsive control panelTimer inspected, no repairs necessary
Miami Beach, FloridaGeneral ElectricZEK736GP2BGnoneDisplay blank. No response to button presses (not even beeps). Oven light comes on when door opened. TRANSFORMER CHECKS OK.Beyond Repair
Sunnyvale, CaliforniaGeneral ElectricJKP16GOP2BGDid not showWhen set to heat to,say, 350 deg F, the oven goes up to approx 200 and then turns off.Repaired
East Wenatchee, WashingtonGeneral ElectricZEK736GPN/AOven light still works but the timer is dead It turned on then went blank (dead)Awaiting receipt of timer
Wellfleet, MassachusettsGeneral ElectricJKP16G0P4BGnoneProblem began w keypad tone sounding intermittently. Progressed to timer sounding 3 time at end of timer cycle but then shutting off, rather than continuing to sound as per normal timer operation. Progressed further to bake or conv. bake functions shutting off randomly and intermittently mid-cycle. Restarting cook function sometimes holds for the duration of the operation, but sometimes shuts off repeatedly. Cutting power to oven to reset sometimes helps for a while, but intermittent shut-downs return eventually. This ERC was repaired by you in 2008 and has worked flawlessly since. Hope you can repair or replace again. Thanks.Repaired