Failure codes, problems, and resolutions for General Electric timer model # WB12K5
|Part Number :
|Appliance Type :
||Electronic Range/Oven Timer
|Do you have a failed General Electric WB12K5 timer?
We can repair or replace your faulty WB12K5 timer.
|City||Manufacturer||Model Number||Part Number||Failure Code||Problem Description||Resolution|
|Tacoma, Washington||General Electric||JGBP34GEP2||WB12K5||N/A||Oven took about an hour to get up to 350. Then one day I turned it on and left the house. When I returned it was off and the house smelled like gas. Repairman said the "thermastat" was broken. When I called GE they said it was not a thermastat but the electronic control board.||Timer inspected, no repairs necessary|
|Greenfield, Indiana||Kenmore||362.7351190||WB12K5||none||The bake/broil/clean functions do not work. I called and talked to Howard, and he said it could be replaced with WB12K6, which you have in stock.||Replaced with reconditioned timer|
|cranston, Rhode Island||General Electric||XL44 JGBP35GEP||WB12K5||F1||Error code F1 after power returned from hurricane Irene||Repaired|
|Auburn, Massachusetts||General Electric||jgbp35wev3ww||wb12k5||Can Not set temps.||Timer will not set temps. It will still cook at whatever temp shows in the window, but you cannot set it. Just keep pushing up or down arrows until it gets close to temp wanted.||Beyond Repair|
|Red Lion, Pennsylvania||General Electric||JGBP34GEP2AD||WB12K5||none||A tree fell on power lines. Power blinked on and off three times then stayed off for approx. 15 minutes. When power came back on, timer wouldn't work||Repaired|
|Calgary, Alberta||General Electric||JGBP35GEP3WG||WB12K5||No failure code||Oven fails to reach the displayed temperature. The oven sensor has been replaced which did not resolve the problem. I just spoke with Howard at ApplianceTimers.com and providing I am able to successfully remove the timer I plan to ship the unit to you for repair.||Awaiting receipt of timer|
|WINNIPEG, Manitoba||General Electric||JGBP34GEV1WH||WB12K5||NONE||OVEN INIGTOR WONT LIGHT||Awaiting receipt of timer|
|Grunthal, Manitoba||General Electric||JGBP35WEW1WW||WB12K5||F0, F2, & F3||Gets up to temperature and sometimes produces an error code with beep and stops heating. Sometimes the oven just turns off and does not display an error code or beep. We have been unable to reliably reproduce error codes.||Repaired|
|Calgary, Alberta||General Electric||JGBP35GEP3WG||WB12K5||No failure code||Good Morning. Our GE XL44 gas range is experiencing an oven temp control problem. I replaced the sensor which seemed to correct the issue. Then last week the oven temp control variance became noticeably significant. For example, the control board would display 375 but the actual temp was significantly less. I removed the WB12K005 control board and would value shipping to Appliance Timers to see if you can trouble-shoot and repair. The clock works fine. The audible alarm changed from a buzz to a squeak. No other symptoms were visible. Markings on the WB12K005 are;|
ERC-14500-GE / 100-392-038 / CH: 164D1954P001
SP +/- % 178 / 580 / 879 / 350 F
SN: 91415 LBL: 18-167-32 / GE: WB12K005 (9229)
|Fort Collins, Colorado||General Electric||JGBP35GEP4WG||WB12K5||F2 or F3||Local appliance company determined temperature sensor was ok, problem is with oven control WB12K5 with white overlay if available||Awaiting receipt of timer|
|Winnipeg, Manitoba||General Electric||XL44||WB12K5||n/a||Thermostat function not working, will not turn element on when oven needs heat. A technician already checked the temp sensor and the element, advised that problem was with timer.||Repaired|
|Stouffville, Ontario||General Electric||JGBP31GEP3WH||WB12K5||N/A||Does not maintain proper temperature in oven.|
When setting oven temp to 350F it shuts off at only 200F.
|Awaiting receipt of timer|