WB27K5187 General Electric/Kenmore Range (Stove, Oven) Timer

Failure codes, problems, and resolutions for General Electric/Kenmore timer model # WB27K5187

General Electric (GE) ERCs and General Electric (GE) stove clocks and timersKenmore ERCs and Kenmore stove clocks and timers Manufacturer :  General Electric/Kenmore
Part Number :  WB27K5187
Appliance Type :  Range (Stove, Oven)
Color : 
Description :  Electronic

 
 
Do you have a failed General Electric/Kenmore WB27K5187 timer?
Click here:

We can repair or replace your faulty WB27K5187 timer.
Request Appliance Timer Service

Recent Service Requests


CityManufacturerModel NumberPart NumberFailure CodeProblem DescriptionResolution
Prescott, ArizonaGeneral Electricjgsp33wb27k5187intermittentclock intermittent. When and if you can get the oven control to come on, set it, and have it come to temperature, the temperature control drops off and the oven quits. A few good bangs on the oven brings it 'back to life'.Awaiting receipt of timer
barre, MassachusettsGeneral ElectricJGSP40AET1AAWB27K5187"lock" light is flasWhile broiling, the "lock" light started flashing and the electronic display became cloudy. We are not able to run the oven or broiler, but the stove top burners are working. The cloudiness has gone away but the "lock" light continues to flash. Unplugging the stove, and attempting to run and clear a "Clean" cycle (per GE's instructions) has not remedide the problem.Awaiting receipt of timer
STATEN ISLAND, New YorkGeneral ElectricJGSP31WETWWWB27K5187F-1UNENDING BELL RINGING AND F 1 FLASHINGAwaiting receipt of timer
Houston, TexasGeneral ElectricJGSP21GER1WHWB27K5187N/ACompletely deadAwaiting receipt of timer
STATEN ISLAND, New YorkGeneral ElectricJGSP31WETWWWB27K5187F 1BELL RINGING INTERMITTANTLY FLASHING F 1Awaiting receipt of timer
Denham Springs, LouisianaKenmore911.3674590WB27K5187Display not workingDisplay not working.Awaiting receipt of timer
Batavia, IllinoisKenmore911.3674590wb27k5187noneUse to give F1 code but now clock works but oven and broil will not.
Nothing wrong with oven, can make it start manually.
Repaired
south Casco, MaineGeneral Electricjdp36got1adwb27k5187power surgeclock oven does not turn onBeyond Repair
San Diego, CaliforniaGeneral ElectricJGSP33WEVW1WB27K5187N/AWhen trying to use oven or self cleaning temp rises to 100 plus degrees and timer resetsRepaired
south casco, MaineGeneral Electricjdp36got1adwb27k5187N/Adoes not workAwaiting receipt of timer
STATEN ISLAND, New YorkGeneral ElectricJGSP31WETWWWB27K5187F-1I WISH TO PURCHASE A STOCK TIMER AND I WILL RETURN MY BROKEN ONERepaired
STATEN ISLAND, New YorkGeneral ElectricJGSP31WETWB27K5187F1BELL AND F1Awaiting receipt of timer
Lynbrook, New YorkGeneral ElectricJGSP44AEV1AAWB27K5187N/AGas pilots are working Broiler works When I push the up pad to go to lets say 350 degrees in a couple of seconds it drops down to 100 it does not hold temperture that you put it on. Also would you be able to tell me how if I wanted to do repair do you get the top of stove off as the scamatic does not show me that. Or if need be would you have someone who could do the repair after I purchased item from you that you could reccommend. I'm in NY Lynbrook 11563. Thank you and will wait for your reply, Florence OConnorAwaiting receipt of timer
Bayside, New YorkGeneral Electricjgsp44aev1aawb27k5187F-3I get code F3 and have already replaced the oven temp sensor. I removed the clock /oven control and found a burnt mark in the top left in the display. I'm assuming this is the problem. I would prefer either a used or new one but have been having difficulty finding one. If neither is a available can I sent mine in for repair?Awaiting receipt of timer
Richmond, VirginiaGeneral ElectricJGSP21GER2WHWB27K5187n/aWhen trying to bake, the oven will not try to light until the chosen temperature is set above 250*F. Once a temperature over 250*F has been selected, everyhting begins normally, the HSI ignites the pilot, then the burner lights up, only to shut off before the oven temp reaches 100*F.Repaired
Bayside, New YorkGeneral Electricjgsp44aev1aawb27k5187F-3I get code F3 and have already replaced the oven temp sensor. I removed the clock /oven control and found a burnt mark in the top left in the display. I'm assuming this is the problem. I would prefer either a used or new one but have been having difficulty finding one. If neither is a available can I sent mine in for repair?Awaiting receipt of timer
Aspinwall, PennsylvaniaKenmoreKenmore 911.36659590Wb27K5187N/APowers off intermittentlyBeyond Repair
Seattle, WashingtonGeneral Electricjgsp31ger1whwb27k5187f2Oven not on. Oven beeps continuously. F2 code appears.Awaiting receipt of timer
Mascot, TennesseeGeneral ElectricJGSP20GER3BGWB27K5187F1When attempting to heat-up, oven beeps and flashes F1Repaired
Yuba City, CaliforniaGeneral ElectricJGSP20GER3136WB27K5187N/AOven will not get hot; fails to ignite. Broiler works fine.Repaired
Charleston, South CarolinaKenmore911.36755792wb27k5187F2 F3I want to purchase a reconditioned timer and will be happy to send the old timer to you after I install the new one.Repaired
Brandon, MississippiGeneral ElectricJGSP21GER3WHWB27K5187E1Constant Beeping - Code E1Awaiting receipt of timer
Spooner, WisconsinGeneral ElectricJGSP30GER2BGWB27K5187N/AOVEN NOT WORKINGRepaired
Aberdeen, MarylandKenmore911.3672991WB27K5187No CodeOven does not keep temperature. Have to set the control to 500F just to get the oven to come on. Thermocouple has been tested and seems to be within range for ambient temperature.Awaiting receipt of timer
Teaneck, New JerseyGeneral ElectricJGSP31GER1WEGWB27K5187N/Aoven does not get hot.Repaired
Charleston, South CarolinaKenmore91136755792wb27k5187f3 f4error appears after about thirty minutes or longer of oven use. Sears repair diagnosed the ERC board as the problem as it is not turning on the fan. The sensor probe appears to be working fine so that is why they day it is the ERC that is no longer functioning properly to regulate the temperature. I hope you can repair it as I am all out of options at this point.Repaired
san jose, CaliforniaKenmore91136655792wb27k5187N/Ano power oven light worksRepaired
SLC, UtahGeneral ElectricJGSP21WET1WWWB27K5187F3We occasionally get an F3 code and the oven shuts off. Also, temperature set control increments/decrements rapidly and it is difficult to set the exact temperature.Repaired
Mount Vernon, IllinoisGeneral ElectricJGSP32GEV2BBWB27K5187N/ADead set or No DisplayRepaired
Palos Heights, IllinoisGeneral ElectricProfileWB27K5187N/Acontrol panel is blank and can not turn on oven, broiler, or timerAwaiting receipt of timer
Oklahoma City, OklahomaGeneral ElectricGAS KITCHEN RANGEWB27K5187F-1After turned on, appliance beeps until turned off.Awaiting receipt of timer
McKeesport, PennsylvaniaGeneral Electricjgsp44aev1aawb27k5187N/ACannot change any settings, turn on any functions, adjust any temps. Clock shows time but cannot change time. Unit is non-functionalRepaired
Newark, OhioGeneral ElectricJGSP23WEV1WWWB27K5187F2, F3F2, F3 error codesAwaiting receipt of timer
New York, New YorkGeneral Electricjgsp20ger1cgwb27k5187f2intermittent beeping and F2 displayAwaiting receipt of timer
Oklahoma City, OklahomaGeneral ElectricJGSP31WETWWWB27K5187F-1Upon oven start-up, intermittent beep with F-1 code.Awaiting receipt of timer
adel, IowaGeneral Electricjgsp33wev4wwwb27k5187N/Adead but didn't keep timeAwaiting receipt of timer
Oklahoma City, OklahomaGeneral ElectricGAS KITCHEN RANGEWB27K5187F-1After turned on, appliance beeps until turned off.Awaiting receipt of timer
Forest Grove, OregonGeneral Electric911 36655794WB27K5187N/AI don't remember the error codes, it has been completely out (non working) for two years.Awaiting receipt of timer
EFFINGHAM, IllinoisKenmore911.3654190wb27k5187N/Abake relay buzzes and can't read the displayRepaired
mooresville, North CarolinaGeneral Electricjgsp21wet1wwwb27k5187noneno display--buzzing soundAwaiting receipt of timer
Lake Forest, CaliforniaGeneral ElectricJGSP33WEV5WWWB27K5187N/AThere are no lights on the panel. It turns the oven or broiler on & turns the temperature up and down, but since it doesn't light up I can't see the oven temperature, or the time, or use the timer.Awaiting receipt of timer
Northridge, CaliforniaGeneral ElectricJGSP33WB27K5187noneControl does not work, clock did keep timeRepaired
San Jose, CaliforniaKenmore911.3652190WB27K5187noneOven and broiler won't turn on. No error codes, just resets back to normal standby mode. Sometimes after trying to turn on 5 or 6 times the oven/broiler will turn on. the key is if you hear the click of the relay the igniter will glow and everything will work. It also seems to work better when the house is warm. It had trouble in the spring, but all summer it works and now it seems to work on hot days and not cold days.Repaired
Wayne, New JerseyGeneral ElectricJGSP31GER2WGWB27K5187NoneOven will not reach correct temperature. I have already replaced the oven sensor.Awaiting receipt of timer
WAYNE, New JerseyGeneral ElectricJGSP31GER2WGWB27K5187NoneOven will not reach correct temperature. I have already replaced the oven sensor.Repaired
Madison, New JerseyGeneral Electricjgsp31ger2wgwb27k5187N/Aoven temperature gets hotter and hotter

already replaced temperature sensor
Awaiting receipt of timer
Slingerlands, New YorkGeneral ElectricJGFSP44AEV3AAWB27K5187No codeThe timer will not display and none of the buttons will work. It use to go on and off periodically and I was able to use the oven when the timer was on. It has been over a week and it has not turned on at all. I have tried resetting the power and that didn't work.Repaired
Novato, CaliforniaGeneral ElectricWB27K5187N/ATimer shows oven reached tempatiure when in fact it did not. Broiler works fineAwaiting receipt of timer
New Alexandria, PennsylvaniaKenmore911.36755590wb27k5187n/acant read displayAwaiting receipt of timer
new alexandria, PennsylvaniaKenmore911.36755590wb27k5187n/ccan't see displayAwaiting receipt of timer