5303935108 Electrolux/Frigidaire Range (Stove, Oven) Timer Repair

Failure codes, problems, and resolutions for Electrolux/Frigidaire timer model # 5303935108

Manufacturer :

Electrolux/Frigidaire

Part Number :

5303935108

Appliance Type :

Range (Stove, Oven)

Color :

Description :

Clock/timer

Do you have a failed Electrolux/Frigidaire 5303935108 timer?
Click here:
We can repair or replace your faulty 5303935108 timer.

Recent Service Requests for Electrolux/Frigidaire Part Number 5303935108

City	Model Number	Failure Code	Problem Description	Resolution
Nevada, Iowa	FEF367CATB	N/A	The relay closes for the bake cycle but does not open at the set temperature. The bake element stays on all the time during the bake cycle. If cancel is pushed it will shut off. When the bake cycle is put on you can watch as the digital temperature increases to the set temperature then stops. However the element continued to heat until manually turned off.	Awaiting receipt of timer
Decatur, Illinois	FEF377BADA	N/A	Over and self-clean do not work, nor does the timer	Awaiting receipt of timer
Bloomington, Indiana	FEF377BADA	F3	The timer signals "F3"(and beeps) a few seconds after "Broil" or "Bake Temp" is selected, and the oven just barely starts to heat. Incorrect information suggested that the temperature probe was bad. That was not the problem -- apparently, it's the timer. In removing the timer, I mistakenly separated the circuit boards, and lost two small washer/spacers. I reassembled the timer, but the middle two screws that join the boards are missing those two small washer/spacers. I also found an extra 5/8" dark grey spacer. I have no idea where it belongs, and I hope it, and possible a missing mate, are not essential for my re-installation of the timer.	Repaired
woodbridge, Virginia	frigidaire	N/A	motor will not stop	Beyond Repair
East Greenville, Pennsylvania	FEF377BADA	NO FAULT CODES	The relay closes for the bake cycle but does not open at the set temperature. The bake element stays on all the time during the bake cycle. If cancel is pushed it will shut off. I checked the temperature probe resistance with an ohm meter and it meets the specs in the service data sheet. When the bake cycle is put on you can watch as the digital temperature increases to the set temperature then stops. However the element continued to heat until manually turned off. I had an oven thermometer and it went over the highest reading of 600 F	Repaired
woodbridge, Virginia	fef377badb	none	self clean motor keeps running	Beyond Repair
Mohnton, Pennsylvania	FEF352BADA	N/A	Oven element heats up as soon as stove is plugged in without ever turning oven on. This has occurred since using self-cleaning oven and the oven probe went and overheated. It happens even after new probe installed.	Timer inspected, no repairs necessary
Chapmansboro, Tennessee	FEF352BADA	NONE	The relay closes for the bake cycle but does not open at the set temperature. The bake element stays on all the time during the bake cycle. If cancel is pushed it will shut off. I checked the temperature probe resistance with an ohm meter and it meets the specs in the service data sheet. When the bake cycle is put on you can watch as the digital temperature increases to the set temperature then stops. However the element continued to heat until manually turned off. I had an oven thermometer and it went over the highest reading of 600 F	Awaiting receipt of timer
Millen, Georgia	FEF367CATB	N/A	Door lock motor keeps running. If you have another timer in stock please let me know.	Awaiting receipt of timer