Ocala, Florida | Bosch | SHU4000 | N/A | Stops during first rinse cycle. Once you move it slightly it will complete the full cycle. | Awaiting receipt of timer |
Kittanning, Pennsylvania | Bosch | SHU3006UC/UO6 | N/A | Sticks at rinse cycle | Awaiting receipt of timer |
VAn Nuys, California | Bosch | SHU4006UC/06 | NA | DETAILED DIAGNOSIS * : NOT CHANGING CYCLE, AC120BYY.NPSC1 RESEARCH ON TIMER , NOT ADVANCE STUCK AT MID-WASH CYCLE AND SOAP DISPENSER WONT CLOSE WEAK/BROKE. NEEDS TIMER PART #22 630 264177 TIMER (NLA)...CALL SUBMITTED FOR NLA VERIFICATION FOR ALTERNATE VENDOR SEARCH WITH NGF...GAVE TECH 92/192/NPSC1 DISPENSER ASSEMBLY IS NEEDED FOR THE LID WILL NOT STAY CLOSE ORDER PART | Repaired |
Van Nuys, California | Bosch | SHU4006UC/06 | NA | : NOT CHANGING CYCLE, AC120BYY.NPSC1 RESEARCH ON TIMER , NOT ADVANCE STUCK AT MID-WASH CYCLE AND SOAP DISPENSER WONT CLOSE WEAK/BROKE. NEEDS TIMER PART #22 630 264177 TIMER (NLA)...CALL SUBMITTED FOR NLA VERIFICATION FOR ALTERNATE VENDOR SEARCH WITH NGF...GAVE TECH 92/192/NPSC1 DISPENSER ASSEMBLY IS NEEDED FOR THE LID WILL NOT STAY CLOSE ORDER PART | Repaired |
Delta, British Columbia | Bosch | SHU4002UC/U06 | N/A | The timer stops when it gets to the place where it is supposed to heat the water. I have checked the voltage to the heater (flow switch) and it is only 22volts. There must not be a good enough contact to supply full voltage. Since the heater does not heat the water the timer will not move on from that position. The heater checks out with 11 ohms. | Repaired |
Daly City, California | Bosch | SHU4006UC/06 | N/A | does not advance | Awaiting receipt of timer |
Altoona, Pennsylvania | Bosch | SHU4002UC/06 | NA | NO HEATING OUTPUT MOST OF THE TIME, USUALLY ONLY PERIODICALLY DURING DRAIN CYCLES INSTEAD OF WASH CYCLES. SERIAL: FD7910270281. | Repaired |
PLYMOUTH, New Hampshire | Bosch | | N/A | TIMER DOES NOT ADVANCE | Awaiting receipt of timer |
SAN JOSE, California | Bosch | SHU3916UC | N/A | Timer stops at 6 o'clock/wash position and has to be helped along after that. I have not pulled the timer. The part numbers listed are the result of Google searches. The dishwasher model number is correct. If you need me to confirm the timer number by removal, I can at your request. | Awaiting receipt of timer |
Elizabethtown, Pennsylvania | Bosch | 264177 | none | stops around the six O'clock area and will not move. Dishwasher will just run. Started intermittent but know does not move even if you help it along | Repaired |
ALTOONA, Pennsylvania | Bosch | SHU4002UC/06 | NA | NO HEATER VOLTAGE OUT PUT / INTERMITTANT | Repaired |
Escondido, California | Bosch | SHU4016UC/U06 | N/A | timer stops & would not move | Repaired |
Baldwin, New York | Bosch | SHU4006 | N/A | Timer gets stuck, clicks as if it wants to move. Have to help it to complete the cycle. Sometimes it does not turn at all. | Repaired |
Delta, British Columbia | Bosch | SHU4002UC/U06 | N/A | Did not turn to complete the cycle. | Repaired |
Chester, New Jersey | Bosch | | N/A | Cycle is stuck in wash. When you move it, it continues | Awaiting receipt of timer |
Saint-Quentin, New Brunswick | Bosch | shu300u06/u06 | N/A | Dishwasher still running without effect | Repaired |
Carmichael, California | Bosch | Bosch SHU 4016uc/06 | N/A | cycle stops during first rinse cycle and with a little nudge, will start again and finish the cycle. | Awaiting receipt of timer |
New Port Richey, Florida | Bosch | SHU4002 | sticks on first wash | timer sticks on first wash cycle | Awaiting receipt of timer |
newcastle, California | Bosch | shu4022uc/u06 | N/A | the timer stops at 6:00 on the dial and will not move I would like a new requilt or repair of my timer | Awaiting receipt of timer |
St-Pamphile, Québec | Bosch | shu3006uc | N/A | timer doesn't run as it should. | Repaired |
Rochester Hills, Michigan | Bosch | SHU4002UC | N/A | Timer stops mid cycle | Repaired |
Nashville, Tennessee | Bosch | SHU4006UC/U06 | N/A | TIMER DIAL STOPS TURNING. SOMETIMES WORKS. | Awaiting receipt of timer |
LITTLE COMPTON, Rhode Island | Bosch | sh3002uc/u06 | N/A | timer no longer advances | Repaired |
Aptos, California | Bosch | SHU4022UC | N/A | Run and Stop in middle of cycle | Repaired |
Redwood City, California | Bosch | SHU3006UC/U06 | N/A | Timer occasionally gets "stuck" at the end of the rinse phase. | Awaiting receipt of timer |
Delta, British Columbia | Bosch | SHU4002W | N/A | Timer stops part-way through cycle at several locations (approx. 5:00, 9:00). Will complete the cycle if it is advanced slightly by hand. Recently this happens more frequently, but sometimes goes through the complete cycle without intervention. | Repaired |
Opelika, Alabama | Bosch | shu4006uc | N/A | The timer frequently gets stuck during both the wash and rinse cycles, and will not complete unless we manually push it forward a bit. | Repaired |
Broadview Hts, Ohio | Bosch | SHU3006UC/06 | N/A | Timer hangs at +/-5 and 9 o'clock positions. | Repaired |
Lexington, Massachusetts | Bosch | SHU 400UC/U06 | N/A | The timer stalls and does not advance after the first cycle | Awaiting receipt of timer |
HURLEY, New York | Bosch | SHU4006UC | N/A | Not advancing to next setting at 6 and 9 o'clock | Repaired |
Trail, British Columbia | Bosch | | N/A | it stops at various points in cycle and has to be manually advanced. | Awaiting receipt of timer |
Toronto, Ontario | Bosch | SHU4016UC | N/A | the timer stops and is not advancing, the dishwasher will work forever if I do not move it manually. | Repaired |
Mercer island, Washington | Bosch | | N/A | Sears repair guy said timer isn't allowing to go to the next cycle. | Awaiting receipt of timer |
Tampa, Florida | Bosch | SHU4016UC/U06 | none | Sticks at about 7+/-
New or reconditioned timer replacement OK. Pls call
8132545333 | Repaired |
San Luis Obispo, California | Bosch | SHU4000 | N/A | Timer stops advancing, has to be prodded along to continue | Awaiting receipt of timer |
Surrey, British Columbia | Bosch | SHU4006UC/U06 | N/A | Sticks in washing cycle | Awaiting receipt of timer |
Scotts Valley, California | Bosch | SHU3016UC | N/A | DURING A WASH CYCLE THE TIMER STOPS MOVING THE DIAL. DURING A RINSE CYCLE THE TIME STOPS MOVING THE DIAL. | Awaiting receipt of timer |
Wappingers Falls, New York | Bosch | SHU4006UC/U06 | N/A | Timer needs a little help progessing to the next stage in wash cycle | Awaiting receipt of timer |
Homer, Alaska | Bosch | SHU 4026 UC/U06 | N/A | Timer is getting stopped at 6:00 and 9:00 positions during cycle and requires manual progression to continue run cycle. | Repaired |
Homer, Alaska | Bosch | SHU 4026 UC/U06 | N/A | The timer catches on the 6:00 and 9:00 positions and needs manual adjustments to continue cycle. | Repaired |