Jenn-Air SVD48600P Gas/Electric Slide In Range Timer

What is the timer/clock part number for the Jenn-Air SVD48600P Gas/Electric Slide In Range?

Timer part number 5700m662-60 for Jenn-Air SVD48600P

The SVD48600P Gas/Electric Slide In Range uses timer part number 5700m662-60.

Do you have a failed Jenn-Air SVD48600P control panel? Click here:

Request Appliance Timer Service

We can repair or replace your faulty Jenn-Air SVD48600P timer.

SVD48600P are also sometimes referred to using these Alternative Names/Model numbers

Maytag SVD48600P Gas/Electric Slide In Range, Whirlpool SVD48600P Gas/Electric Slide In Range

SVD48600P Schematic and Wiring Diagrams

Control panel Parts diagram
SVD48600P Gas/Electric Slide In Range Control panel Parts diagram
Top assembly Parts diagram
SVD48600P Gas/Electric Slide In Range Top assembly Parts diagram
Oven Parts diagram
SVD48600P Gas/Electric Slide In Range Oven Parts diagram
Blower & convect assy. Parts diagram
SVD48600P Gas/Electric Slide In Range Blower & convect assy. Parts diagram
Body Parts diagram
SVD48600P Gas/Electric Slide In Range Body Parts diagram
Gas controls Parts diagram
SVD48600P Gas/Electric Slide In Range Gas controls Parts diagram
Access panel Parts diagram
SVD48600P Gas/Electric Slide In Range Access panel Parts diagram
Door Parts diagram
SVD48600P Gas/Electric Slide In Range Door Parts diagram
Wiring information Parts diagram
SVD48600P Gas/Electric Slide In Range Wiring information Parts diagram

Recent Service Requests

CityManufacturerModel NumberPart NumberFailure CodeProblem DescriptionResolution
Nashville, TennesseeJenn-AirSVD48600P71002959none - intermittent timer/control comes on/off intermittentlyRepaired
Burlington, ConnecticutJenn-AirSVD48600P71002959N/AClock and all other buttons stopped workingRepaired
Beasley/ Phone 250-551-2798, British ColumbiaJenn-AirSVD48600PC71002959N/ADoes Not Stay On . Digital Screen.Repaired
Raleigh, North CarolinaJenn-AirSVD48600P71002959F-3F-3 error message repeatedly blinks and cuts off the oven. Ultimately, it will not turn off for oven use.Repaired
Raleigh, North CarolinaJenn-AirSVD48600P71002959F-3F-3 error message repeatedly blinks and cuts off the oven. Ultimately, it will not turn off for oven use.Repaired
Raleigh, North CarolinaJenn-AirSVD48600P71002959F-3F-3 error message repeatedly blinks and cuts off the oven. Ultimately, it will not turn off for oven use.Repaired
Lacey, WashingtonJenn-AirSVD48600P71002959blankno display, no operationAwaiting receipt of timer
Colebrook, New HampshireJenn-AirSVD48600P71002959N/AOn occasion the broil element will stay on and not shut down. Customer will shut breaker off and then element will not come back on until called for again.Timer inspected, no repairs necessary
St-Félix de Valois, QuébecJenn-AirSVD48600PC71002959N/ADEAD/ DO NOT WORKAwaiting receipt of timer
glastonbury, ConnecticutJenn-AirSVD48600P71002959N/AOVEN WON'T HEAT. FAN NOT WORKINGRepaired
Hatfield, MassachusettsJenn-AirSVD48600P71002959N/ANeither bake nor broil selections function (no response). Clock and timer still work.Repaired
Hatfield, MassachusettsJenn-AirSVD48600P71002959N/ANeither bake nor broil selections function (no response). Clock and timer still work.Repaired
Hobart, WisconsinJenn-AirSVD48600P71002959N/ADoes not heat on bake cycle, broil cycle works.Awaiting receipt of timer
SANTA CRUZ, New MexicoJenn-AirSVD48600P71002959noneNO CONTROLS, NO CLOCK, NO OVEN, BUT CONVECTION FAN ON ALL THE TIME.Repaired
Kapaa, HawaiiJenn-AirSVD48600P71002959N/AOven/broil does'nt workAwaiting receipt of timer
Abbotsford, British ColumbiaJenn-AirSVD48600PC71002959N/AThe "up arrow" on the controls does not work, only the "down arrow". I am unable to use time, increase oven temperature above 350 (the oven temp starts at 350 and then is adjusted by arrow buttons).Awaiting receipt of timer
JAMAICA PLAIN, MassachusettsJenn-AirSVD48600P71002959N/ANO BAKERepaired
Green Bay, WisconsinJenn-AirSVD48600P71002959N/AOven does not heat to proper temperatureAwaiting receipt of timer
Rochester Hills, MichiganJenn-AirSVD48600P71002959N/AOven (bottom) heating element has no signal (element tested and works)Repaired
Tyrone, PennsylvaniaJenn-AirSVD48600P71002959no code--oven will nClock and timer working. Oven will not heat to temp. Local repair man says it is this part malfunctioningRepaired
Seattle, WashingtonJenn-AirSVD48600P71002959NoneAll aspects of the control panel work fine except the elements in the oven do not turn on. The repair man said to problem is in the control panel as there is a something in the panel that has to work for the baking and broiling elements to turn on. He did remove and check the internal fuse and it works fine.Repaired
Prescott, ArizonaJenn-AirSVD48600P71002959N/ARelays clicking, no bake, no broilRepaired
Newburyport, MassachusettsJenn-AirSVD48600P71002959?None of the oven functions workRepaired
Olds, AlbertaJenn-AirSVD48600PC71002959N/AClock flashes continually. Oven will start to warm up but then shuts down. Time cook light also shuts down.Repaired
SAULT STE. MARIE, OntarioJenn-AirSVD48600PC71002959N/ARANGE NOT TURNING ONRepaired
Chester, VermontJenn-AirSVD48600P71002959N/AThe regular Bake and Convection Bake functions do not get to temperature selected. For example, if you set the oven to 350 degrees, it takes an extraordinary amount of time to get to 260 degrees, and then it will go no higher. The element was tested and is OK and power voltage tested OK to the element. The Broiler functions properly.Repaired
Louisville, KentuckyJenn-AirSVD48600P71002959BlankIt does not turn on at all. The face is blankAwaiting receipt of timer
Louisville, KentuckyJenn-AirSVD48600P71002959BlankIt does not turn on at all. The face is blankAwaiting receipt of timer
Nanaimo, British ColumbiaJenn-AirSVD48600PC71002959N/AOven will not heat in any mode.Awaiting receipt of timer
Kingwood, TexasJenn-AirSVD48600P7100-2959N/AMy oven touchpad went out and cannot be replaced. I am looking for a replacement.Awaiting receipt of timer
Guelph, OntarioJenn-AirSVD48600PC71002959noneOven does not heat. Everything else is good, except no output from electronic control.Repaired
tipton, IowaJenn-AirSVD48600P??no error code displaBoth the Oven Burner and Broiler Burner failed to work at the same time. As it was working on it i managed to break one of the contact assemblies off the circuit board! (sorry) This was a factory new replacement timer purchased 2 years ago.Repaired
tipton, IowaJenn-AirSVD48600P??F3 ErrorThis time has two problems. Primary problem is F3 error. ( I have already replaced the oven temperature sensor.) Second issue is that on the back side of the faceplate, behind the Timer UP or Increase arrow, the little plastic pin is broken off and missing. For now, this isn't a problem as i can share the faceplate with both timers. This is the original timer, oven is roughly 15 years old.Repaired
tipton, IowaJenn-AirSVD48600P??no error code displaBoth the Oven Burner and Broiler Burner failed to work at the same time. As it was working on it i managed to break one of the contact assemblies off the circuit board! (sorry) This was a factory new replacement timer purchased 2 years ago.Repaired
tipton, IowaJenn-AirSVD48600P??F3 ErrorThis time has two problems. Primary problem is F3 error. ( I have already replaced the oven temperature sensor.) Second issue is that on the back side of the faceplate, behind the Timer UP or Increase arrow, the little plastic pin is broken off and missing. For now, this isn't a problem as i can share the faceplate with both timers. This is the original timer, oven is roughly 15 years old.Repaired
WORCESTER, MassachusettsJenn-AirSVD48600P5700M662-60N/ARepaired
Bethesda, MarylandJenn-AirSVD48600P5700M662-60n/a10 days ago, clock display went out and loud buzzing noise came from unit. Flipped breaker and left off for 5 minutes. Turned back on, reset, everything normal. Yesterday, same symptom, but cure doesn't work. Online forums suggest that it is the clock/board, but it is available only as special order (also part no. 71002959).Awaiting receipt of timer
Johnston, Rhode IslandJenn-AirSVD48600P5700M662-60N/Atimer and oven shuts off . nothing shows at all. comes back on but cannot bake above 350 degrees and may shut off. up and down arrows only effect a lowering of temperature.Awaiting receipt of timer
Jefferson, MaineJenn-AirSVD48600P5700M66260Just went deadWas baking potatoes and it just shut everything down mid way through the bake?Awaiting receipt of timer
VANCOUVER, British ColumbiaJenn-AirSVD48600PC5700M662-60F3 F5Oven stays on for only twenty minutes and then shuts off
error code comes on F3 or F5

can't bake a cake or anything that takes an hour to bake as
the oven shuts off after only twenty minutes
Repaired
Jefferson, MaineJenn-AirSVD48600P5700M66260Just went deadWas baking potatoes and it just shut everything down mid way through the bake?Awaiting receipt of timer
Pho. Az, ArizonaJenn-AirSVD48600P5700M662-60Control board failThe fan of the oven starts out fast and slows down and eventually stops.A technician told us that the control board is causing the problem.It makes the ovens fan start and then stops because the 110 volts arent entering repeatedly.This control board needs to be refurbished.Awaiting receipt of timer
Eau Claire, WisconsinJenn-AirSVD48600P5700M662-60noneThe timer appears to work fine (has no error codes) but intermittently cannot preheat the oven within the normal timeframe. It can reach 280 degrees but then is extremely slow to increase the temperature by even 5 degrees after that. One time it quickly jumped up to 350 degrees after sitting at 280 degrees for a long time. After the breaker was turned off and back on, it worked one time (pre-heated to 350 degrees in less than 10 minutes), but then stopped working correctly again after that. Now, even turning the breaker off and on does not seem to fix it.Repaired
Kenmore, WashingtonJenn-AirSVD48600P5700M662-60Up button does not wThe up button the the control panel doesn't work. This controls the temperature and timer for the stove.Awaiting receipt of timer
Louisville, KentuckyJenn-AirSVD48600P5700M662-60F-2 and F-3Received an F-2 error code after cooking one night. Now when we try to use the bake or broil options, receive error code F-3.Repaired
Los Angeles, CaliforniaMaytagSVD48600P5700m662-60no lights on panelBeeping noise than info panel went out.. no oven, no pilot
Repair guy says needs new.timer but has none
Awaiting receipt of timer
Pine Grove, PennsylvaniaJenn-AirSVD48600P5700M662-60F4Oven spikes to high temperature and gives the error coder F4Timer inspected, no repairs necessary
Dollard-des-Ormeaux, QuébecJenn-AirSVD48600P5700M662-60Timer doesn't power Baked element died along with it the timer stopped working. I replaced the bake timer but oven controls aren't working.Beyond Repair
Baltimore, MarylandJenn-AirSVD48600P5700M662-60NAoven only reports a 100degree temperatvre and fails to warm up. Service identified controller as the problem, but noted that they are out of stock. Found this site to repair. Thanks!Repaired
Baytown, TexasJenn-AirSVD48600P5700M662-60N/ABroiler element turned on by itself and would not cancel.(gibberish on panel) I flipped breaker off, waited about two hours turned back on there was nothing showing on timer and it is inop.Beyond Repair
Scarborough, OntarioJenn-AirSVD48600PC5700M662-60N/ADisplay goes off intermittently whether oven is on or not. Will sometimes come back on if you tap the face of the timer. Also, the broiler and the fan will turn on (sometimes) of its' own accord when the oven is on. At one time we had an F2 error code but it doesn't do that anymore.Beyond Repair
Los Angeles, CaliforniaMaytagSVD48600P5700m662-60no lights on panelBeeping noise than info panel went out.. no oven, no pilot
Repair guy says needs new.timer but has none
Awaiting receipt of timer
Melrose Ma., MassachusettsJenn-AirSVD48600P5700M662-60Not ShownSelf Cleaning has not worked for along time

Current problem oven and broiler not heating at all
Service Tech from Gray's Appliance Melrose Ma. told me the problem
was the timer.
Repaired
Burlington, OntarioJenn-AirSVD48600PC5700M662-60N/AOven does not reach/hold requested temperatureRepaired
Smithfield, UtahJenn-AirSVD48600P5700M662-60NADoesn't light up and no response from buttons.Awaiting receipt of timer
Alsea, OregonJenn-AirJenn-Air SVD48600P5700M662-60N/ATouch pad does not respond. Cannot turn oven on.Awaiting receipt of timer
Salt Lake City, UtahJenn-AirSVD48600P5700M662-60F3Oven begins preheating, but eventually gives an F3 error and shuts off. (Last time this happened was at 375 degrees.) We have replaced the thermo sensor and get same error. Sometimes the F3 alternates with an F5 error.

I would be open to replacing the control panel if you have one available. Thanks, Ryan
Awaiting receipt of timer
Hot Springs, ArkansasJenn-AirSVD48600P5700M662-60N/AOven intermittently doesn't go onRepaired
Burlington, VermontJenn-AirSVD48600P5700M662-60F2The f2 code went off and the upper heating element remained on. The oven heating element would not turn off even though the timer indicated that the move was not on. I turned off the circuit breaker to the range and left it off or a bit. When i turn the breaker on the oven resumed heating even though the timer indicated it was off.Repaired
Brownstown, MichiganJenn-AirSVD48600P5700M662-60NoneAlarm Sounds when not using Drops out of bake cycle Using igniter changes clockAwaiting receipt of timer
Cassel, CaliforniaJenn-AirJenn Air SVD48600P5700M662-60N/ATouchscreen is dark. Oven will not turn on and a humming sound is present.
Stovetop burners work OK.
Repaired
Pickerington, OhioJenn-AirSVD48600P5700m662-60F3After oven is at entered temperature for a while, error code F3 displays and oven shuts off. Convection fan in oven runs intermittently when not on convection and sometimes when oven is off.Awaiting receipt of timer
Whitefield, New HampshireJenn-AirSVD48600P5700M662-60no bake or broilno bake or broil , checked for power out at board , no power outRepaired
Chicago, IllinoisJenn-AirSVD48600P5700M662-60N/ABlinks on and offRepaired
Edina, MinnesotaJenn-AirSVD48600PU5700m662-60none - no displaythe display doesn't work, so I can't operate the oven, clock, timer, etc.Beyond Repair
Atlanta, GeorgiaJenn-AirSVD48600P5700M662-60N/AThe Bake or clock does not work any longer. The up button on the temp does not work. It started blinking out prior to those problems.Repaired
Kanata, OntarioJenn-AirSVD48600PC5700M662-60noneRepairman indicated there was a problem with the bake function. There was no code indicating a problem but the oven would not go beyond 280 degrees regardless of oven setting.
Broiler seemed to function properly.
Repaired
Chicago, IllinoisJenn-AirSVD48600P5700M662-60N/ABlinks on and offRepaired
quincy, MassachusettsJenn-AirSVD48600P5700M66-260N/Acould you fix the one I have if you do not have one?Awaiting receipt of timer
Anglemont, British ColumbiaJenn-AirSVD48600PC5700M662-60N/AWhen bake button is pushed if you push the up arrow 350 appears,but as you push the up button the temperature selected goes down just as if you were pushing the down arrow.If you select broil the up arrow increases the temperature as it should. Everything else functions normally.Repaired
Katy, TexasJenn-AirSVD48600P5700M662-60N/ANO DISPLAY NO BEEP NOISE NO START THE OVENAwaiting receipt of timer
St.paul, MinnesotaJenn-AirJenn Air SVD48600POEM 71002957Dead no displayNo display on both unitsAwaiting receipt of timer
St.paul, MinnesotaJenn-AirJennAir SVD48600POEM 71002957No displayBlank displayAwaiting receipt of timer
St.paul, MinnesotaJenn-AirJenn Air SVD48600POEM 71002957Dead no displayNo display on both unitsAwaiting receipt of timer
St.paul, MinnesotaJenn-AirJennAir SVD48600POEM 71002957No displayBlank displayAwaiting receipt of timer
Worthington, OhioJenn-AirSVD48600P71002957NoneThe electronic screen displays all eights.Repaired
Huntsville, AlabamaJenn-AirJenn Air SVD48600P71002957N/AThe oven shuts down when it gets up to temp for a while. Seems to be a common problem on these ranges.Repaired
Maineville, OhioJenn-AirSVD48600PAP4396710F5Intermittent F5 when using oven controls, clock works normally.Repaired
Suwanee, GeorgiaJenn-AirJenair SVD48600P7100 2959 old 5700 M662-60 newN/ADual fuel Range,Burners work with Gas, Oven will not operate,Downdraft worksRepaired
Suwanee, GeorgiaJenn-AirJenair SVD48600P7100 2959 old 5700 M662-60 newN/ADual fuel Range,Burners work with Gas, Oven will not operate,Downdraft worksRepaired
Broken Arrow, OklahomaJenn-AirSVD48600P7100243NONECONTROL IS DEAD AS NO POWER GOING TO ITAwaiting receipt of timer
Birmingham, AlabamaJenn-AirModel SVD48600P5700m662-60 per your websiteN/AThe bottom heating element burned out. The electricity to the oven was turned off to replace the element. When the power was restored the panel would not come on.Beyond Repair
Salt Lake City, UtahJenn-AirSVD48600P7601P510-60None IndicatedBake and broil elements do not heat up. Everything on Control Panel appears to work. No fault codes are indicated. Can turn bake/broil on and you hear clicking and a preheat temp of 100 degrees is indicated. The elements never heat up though and the temperature stays at an indicated 100 degrees. Have verified that proper voltage is flowing from outlet, elements tested for continuity along with temperature sensor and high limit thermostat. All tested as working correctly. Therefore it would seem the timer/control panel has some sort of failure and is not completing the circuit to allow electricity to flow to the elementsRepaired
Mead, WashingtonJenn-AirSVD48600P7601P510-60F5Oven will not heat up sits at 100 degrees. ( Elements ok, relay board replaced, high temp fuse replace.)Repaired
Amherst, New YorkJenn-AirSVD48600P5700M662-60 (Formerly 71002959 0909 NM)F2 and F3, think an All works well except the OVEN. Heats up and then beeps and codes out. Usually F3 I believe but have had F2 and an F5. I replaced the oven sensor twice now..thought that worked for a while but the problem returned.Awaiting receipt of timer
Vancouver, British ColumbiaJenn-AirSVD48600PC??PS2078136none; panel loses poControl panel frequently and randomly loses power when oven is on at, what seems to be, above 300*. Pressing the oven bake or convention button sometimes will return power, oven will run and then again control panel will shut down.

The high heat oven sensor was replaced and initially seem to fix the problem, for a short time. Oven is now back to is shutting down. In a phone call with a repair technician, the control panel was identified as the most probable issue.
Repaired
Rosendale, New YorkJenn-AirSVD48600P6?Oven not working; Convection fan runs constantly. Currently breaker to over on electric panel turned off.Beyond Repair
Hamilton, OntarioJenn-AirSVD48600PC02400173N/ANo power and buzzing relay.Repaired
Whitby, OntarioJenn-AirSVD48600PCPS2078134F5We get a F5 code when we are using the oven on "convection roast"Repaired
Savannah, GeorgiaJenn-AirSVD48600P5700M622-60N/AHave had technician check it out. Oven doesnt work.Awaiting receipt of timer
Toronto, OntarioJenn-AirSVD48600PC7601P518-68 100-775-00 585/905'FNAIt just died -- When pressing CANCEL the entire panel lights with all digetsBeyond Repair
red lion, PennsylvaniaJenn-AirSVD48600P5700M662-60noneup arrow on face does not workAwaiting receipt of timer
Grove City, PennsylvaniaJenn-AirSVD48600P5700M662-60SHUTS OFFi HAVE REPLACED THE Temp probe. The clock will shut off typically above 350 degrees. It does come back on.Repaired
Cohasset, MassachusettsJenn-AirSVD48600P5700M662-60N/AOriginally Up arrow did not work. But when loosening a screw to take it off the board shorted before I turned off the power,Repaired
San Antonio, TexasJenn-AirSVD48600PPS2078136N/ATimer does not function.
The BAKE temperature cannot be set above 350 degrees.
Repaired
Dublin, OhioJenn-AirSVD48600P71002959F-3Oven turns on will stay on for a while and then F3 error comes on (beeping and blinking) and turns oven off.Awaiting receipt of timer
Richmond Hill, OntarioJenn-AirSVD48600PC5700M662-60none - oven just turWhen we use the oven, the display starts to blink and the oven turns off. Sometimes the display goes off entirely. Eventually the display returns and the oven functions once again.Repaired
Sneads Ferry, North CarolinaJenn-AirSVD48600P5700M662-60n/aOven, broiler, oven cleaning and convection will not get hot-inop.Repaired
TORONTO, OntarioJenn-AirSVD48600PC024-00173NONENEITHER BROIL NOR BAKE WORK AT ALL
OVEN FAN WORKS WHEN ON BROIL
DOOR LOCK MECHANISM WORKS
Repaired
Toronto, OntarioJenn-AirSVD48600PCWhirlpool 5700m662-60F5Issue 1. Oven was generating an F3 error. I replaced the temperature sensor. It is still not working properly, though now it is generating mostly F5 errors, usually after being turned on for a few minutes.

Issue 2. Also, the plastic pins operating the Up and Down arrows are broken. I fixed the Up control with a piece of dowel and some crazy glue, and it works fine! However for the Down arrow I think I got glue in the switch and it will no longer work. I don't think this can be fixed, but please take a look.
Repaired
Lavaltrie, QuebecJenn-AirSVD48600PC71002959N/ALED DISPLAY DONT LIGHT
CAN NOT SET OVEN TEMPERATURE
Awaiting receipt of timer
Bedford, New HampshireJenn-AirSVD48600P5700m662-60no failure codes"Cooling fan" runs when oven goes above 250 degs (didn't used to do this---functionally everything works but my wife says she cannot live with the noise!
Started happening after one day when controller made some funny relay or sparking noise when a stove top burner was turned on.
Awaiting receipt of timer
Hammonds Plains, Nova ScotiaJenn-AirSVD48600PC7601P510-60F3 and F5The timer keeps coming up F3 and F5 codes and self clean does not workRepaired
Ajax, OntarioJenn-AirSVD48600PC5700m662-60F2Won't heat upAwaiting receipt of timer
Ajax, OntarioJenn-AirSVD48600PC5700m662-60F2Won't heat upAwaiting receipt of timer
Mississauga, OntarioJenn-AirSVD48600PC209699F2 or 3 not doing itWas showing error codes at heats higher than 350F. Now oven doesn't heat properly and neither self -clean or the broiler workRepaired
Schwenksville, PennsylvaniaJenn-AirSVD48600POld # 71002959 New# 5700M662.60noneRange is propane gas burners but over is electric so duel fuel. The display used to work but the oven would shut off after being on for about 30-45 mins and then would come back on blinking the display. Now the display will not come on at all.Repaired
Portland, OregonJenn-AirSVD48600P5700m662-60N/AThe timer buttons do not always function, meaning the timer and oven temperature cannot be set. The problem is worsening, to the point that the buttons almost do not work at all.Awaiting receipt of timer
Lake Oswego, OregonJenn-AirSVD48600P7601P510-60None, temp buttons nTEMP UP AND DOWN BUTTONS NOT WORKING, ALL ELSE IS FUNCTIONALRepaired
Ottawa, OntarioJenn-AirSVD48600PCPS2078136F5, F3, F2Oven seems to work fine, but the control panel gives an F5 or F2 error once it heats up. I have already replace the long oven temperature sensor.Repaired
Lake Oswego, OregonJenn-AirSVD48600P5700m6662-60None, temp buttons nTEMP UP AND DOWN BUTTONS NOT WORKING, ALL ELSE IS FUNCTIONALRepaired
Belmont, MassachusettsJenn-AirSVD48600P71002959N/AThe Arrow Up button doesn't work. As a result we cannot increase the temp to more than the default of 350FRepaired
Walpole, New HampshireJenn-AirSVD48600PUnknownN/AOven no work, Broiler no work, Convection Fan never worked since I bought the house. Oven and broiler went out on the same day. Appliance technician checked to make sure power was getting to the boardRepaired
Louisville, KentuckyJenn-AirSVD48600P71002959Does not turn on.Does not power on.Beyond Repair
Highland, MichiganJenn-AirSVD48600P71002959N/AOven setting clears and stops for a few minutes then the blank display returns to normal. the oven heating stops.Awaiting receipt of timer
Portland, OregonJenn-AirSVD48600P5700M662-60noneLCD is difficult to read, all digits are "ON" making it difficult to read the time, temperature, etc. Happened after a power outage.Awaiting receipt of timer
Bainbridge Island, WashingtonJenn-AirSVD48600P71002959N/AThe oven will seem to work fine, start (allow selection of convection methods), even cook for a period of time then will no longer maintain temp, clock time will flash as if power was lost then restored or oven will shut down (indicating no power at all). Might be temp related as system will restore after a short wait, but likely repeat (intermittent) or not. I would like to repair or replace part thanks.Awaiting receipt of timer
Saskatoon, SaskatchewanJenn-AirSVD48600P71002959N/APanel shut down while oven works suddenly and works again afterRepaired
patterson, New YorkJenn-AirSVD48600P71002959N/Anot able to adjust oven temperature with ''UP'' arrow on control panelAwaiting receipt of timer
Mississauga, OntarioJenn-AirSVD48600PC5700m662-60N/AThere is an up and down arrows which adjusts both timer and oven temp. Up arrow has bit the dust- gets used the most. Problem is not interrmittantRepaired
Burlington, OntarioJenn-AirSVD48600PC71002957N/AOven FailedTimer inspected, no repairs necessary
TIny, OntarioJenn-AirSVD48600PC7601P510-60UnknownTimer function however oven will not heat up on anything except one heating function, Bake only, functions not working are convections, both settings heats to like 159 and stops. Bake function seems to work will come to temperature slowly. I had a service technician look at the oven and said the timer was broken and he could not get parts. All other functions of the oven and timer were checked and functioning.Repaired
Greenfield, IndianaJenn-AirSVD48600P7601P510-60There was no failureNo longer will show anything in viewer window. Having another part of the stove repaired (lower relay). If this cannot be fixed I would like to buy a reconditioned timer or a new timer whichever you may have.Repaired
Saskatoon, SaskatchewanJenn-AirSVD48600PC71002959N/A - tech advises BBoth bake and broil heat / temperature commands appear in screen, but are not received by oven elements, as no heat in oven from either command.Repaired
DRUMMONDVILLE, QuebecWhirlpoolSVD48600PC71002959N/AThe oven element is not working but I checked the element itself and it's good. Therefore, I assume it's the control board.Beyond Repair
The Colony, TexasJenn-AirSVD48600P5700M662-60No code, there is noNo display on time, all buttons unresponsive.Beyond Repair
Morro Bay, CaliforniaJenn-AirSVD48600P12001690ADon’t knowThe push pad for up and down is worn out.Repaired
Caledon East, OntarioJenn-AirSVD48600PC71002959Up arrow button doesThe up arrow for oven temperature doesn’t work. Max temperature 350 which is default when turned on.Awaiting receipt of timer
DRUMMONDVILLE, QuebecWhirlpoolJenn-Air Range SVD48600PC71002959N/AEverything works fine except the oven element. The element itself has been checked out and it's good. The broil element works fine as well. I therefore assume it's the timerRepaired
Grafton, IllinoisJenn-AirSVD48600P71002959N/Ano displayAwaiting receipt of timer
Harrisburg, PennsylvaniaJenn-AirSVD48600P5700M66260F7display went blank for a few minutes. Now displays F7 code.Awaiting receipt of timer
Caledon East, OntarioJenn-AirSVD48600PC71002957N/AThe up arrow on oven temperature doesn't work. Stuck at 350 which is default temperature when turned on.Awaiting receipt of timer
Hertford, North CarolinaJenn-AirSVD48600PControl panelN/ABroiler element will not turn offAwaiting receipt of timer
Toronto, OntarioJenn-AirSVD48600PC024-00173-04N/ARepair person reported electronic short that then disrupted oven relay.Repaired
LOVELAND, OhioJenn-AirSVD48600P71002959DIDN'T SEE ONEBROKEN MALE CONNECT ON CONTROL PANEL I BROKE REMOVING AND OVEN WON'T WORK BUT HEATING ELEMENT IS GOOD . PLUS UP ARROW BUTTON WILL NOT WORK AT ALL ADJUSTING CLOCK OR ANYTHING. WHEN TURN OVEN ON ARROW TO ADJUST UP DIDN'T WORK AND DON'T THINK IT WAS EVEN GETTING WARM.Repaired
Olds, AlbertaJenn-AirSVD48600PC71002959N/AActual oven temperature is much below the timer settings and readings. At 350 degree setting,oven is about 280. At 425 it is about 360 degrees. Sometimes the temperature drops sharply.

This unit was repaired by you in 2015 and is under warranty.
Timer inspected, no repairs necessary
charlotte, North CarolinaJenn-AirSVD48600P, 18459574AW71002959doesn't heat up abovHI: I CANNOT find this part anywhere online and have no clue how to un-install it to repair. can anyone help?Repaired
Olds, AlbertaJenn-AirSVD48600PC71002959N/AThis unit was sent in May 2018 because of intermittent baking temperature problems, mainly below temperature. Resulted in items being under-baked but top being burnt. You found no problems and returned it.
The problems remain even when oven sensor was replaced.
Talked with Howard Simons on June 7. He said that you folks would replace the bake relay. He thought that, because the problem is intermittent, a problem with that relay may have not shown up last time. We would like to have the roast relay replaced at the same time.The unit is under warranty
Repaired
Charlotte, North CarolinaJenn-AirSVD48600P, 18459574AWY??My oven will only heat to 100. Our repair man told me it was one of two problems and obviously the other was not the case. He said it is the face piece. Thank you.Repaired
Moultonborough, New HampshireJenn-AirSVD48600P71002959timer won't setTimer will not setRepaired
Bow, WashingtonJenn-AirSVD48600PPS2078136F3Oven only goes to 350 at bake. Broil works, but it can only be turned lower in temperature. Only the down button works for temp or clock setting.Beyond Repair
Raleigh, North CarolinaJenn-AirSVD48600P209699N/AThe range has a loud electric hum when the power is on. Also the timer display is blank.Repaired
Davidson, North CarolinaJenn-AirSVD48600P5700M662-60N/AUp arrow button to increase oven temperature does not work.Awaiting receipt of timer
South Barre, VermontJenn-AirSVD48600P71002959none - intermittentRandom intermittent disruption of clock and oven functions. Light tapping of housing sometimes returns function. Sometimes functions completely normally, sometimes the readout is blank.Repaired
Trochu, AlbertaJenn-AirSVD48600PC5700M662-60F3Oven heats up to temperature, then in about 10 minutes it gives the F3 Error. The very first time was a F5 Error code, then consistently was F3 after many attempts. Did the usuals, turned off the breaker, restarted, still code F3. Note: we put a brand new sensor in and still get the F3 Error code.Repaired
Esko, MinnesotaJenn-AirSVD48600P71002959F3F3 Error code after using oven for about 25-35 minutes. Tried replacing the oven temperature sensor which didn’t fix the problem.Repaired
Esko, MinnesotaJenn-AirSVD48600P71002959F3F3 Error code after using oven for about 25-35 minutes. Tried replacing the oven temperature sensor which didn’t fix the problem.Repaired
Esko, MinnesotaJenn-AirSVD48600P71002959F3F3 code while oven is heating up to temperature. I’ve replaced the oven temperature sensor as well but it didn’t fix the problem.Repaired
Belfair, WashingtonJenn-AirSVD48600Pindicated by label on unitN/Ablank screenAwaiting receipt of timer
Belfair, WashingtonJenn-AirSVD48600PAP4396710- (5700M662-60)N/Ablank screenAwaiting receipt of timer
Truro, Nova ScotiaJenn-AirSVD48600PC76015P10-60No codes. Panel not Oven was on and working. Heard a click just like when you shut off the oven. No lights on panel at all and oven not working. When you hit bake or cancel, the panel flashes for a second ... but oven does not respond at all.Beyond Repair
Fayetteville, GeorgiaJenn-AirSVD48600P5700M662-60F3Front panel cover has hole and up button might need repair. F3 code following temperature climbing randomly.Beyond Repair
New York, New YorkJenn-AirSVD48600PAP4396710deadTimer appears to be dead following a power outage. Oven has power, but controller LED does not light and buttons are unresponsive.Awaiting receipt of timer
Courtice, OntarioJenn-AirSVD48600PC71002959no error code just sThe control cuts out and goes black when in bake mode when the temperature is increasing beyond 225 dF. We push off button several times then the screen lights up push bake and continues increasing the temperature unit it cuts out again and repeats. Have tried using the range vent fan hoping to cool the electronic board but does not always have an effect.Repaired
Fayetteville, GeorgiaJenn-AirSVD48600P71002959F3Would like a reconditioned timer. Timer is not repairableAwaiting receipt of timer
MIDLOTHIAN, TexasMaytagSVD48600P5700m662-60LackCant adjust heat higher than 350. Goes down but not up. Up button doesnt appear to workAwaiting receipt of timer
Mississauga, OntarioJenn-AirSVD48600PCLabel on Timer sent inF5 and F3Oven works for a period of time, then you usually get a F5 reading and from time to time a F3 reading - at time when oven is not on the convection fam will go on for a breif few seconds.Repaired
Greenfield, IndianaJenn-AirSVD48600PNot sure May be 71002959no failure codeThe touch pad for the clock does not work - afraid there may be other failures soon.Repaired
Toronto, OntarioMaytagJennAir SVD48600PC71002959N/ALooking to replace the control board of my oven. Everything with the oven works find except one button on the interface - the up arrow on the upper right side of the panel (see pic at link below).

https://www.rcappliancepartsimages.com/dbImages/i/00012580/Oven-Control-Board-5700M662-60--03954095.jpg

Do you have this part?

Thank you
Awaiting receipt of timer
Mississauga, OntarioMaytagSVD48600PC7601P516-60N/AWhile trying to change oven light door switch, inadvertently short circuited the L2 and CVB terms. Blew circuit breaker, reset it. Clock light came on flashing - expected if functioning. Turned off circuit breaker,, put everything back together and turned on breaker. Nothing! No clock flash, nada?
You folks repaired this timer back in Nov of 2017
Repaired
Black Mountain, North CarolinaJenn-AirSVD48600P71002959noneOven doesn't work at all. The clock light doesn't work nor does any of the other touch buttons. when press bake, it shows up as 00000 or 8888. you cannot read it at all. nothing happens.Beyond Repair
DALLAS, TexasJenn-AirSVD48600PPS2078136noneUp button will not work.Repaired
Laval, QuebecJenn-AirSVD48600P71002959not availableElectric oven no longer turns on.Beyond Repair
NORTH CANTON, OhioJenn-AirSVD48600P71002959n/aoven scroll arrows not workingAwaiting receipt of timer
Peoria, ArizonaJenn-AirSVD48600P71002957N/ANot able to set temperature or timer.Beyond Repair
Marion, North CarolinaJenn-AirSVD48600P71002957n/aBroiler will not turn off, and possibly oven unit will not turn off. I had to unplug it from the wall to get the broiler to go off.Repaired
Goffstown, New HampshireJenn-AirSVD48600P71002959no error code,no error but it started with the up temp button not working, then the next thing was the clock would stop working and just blink, the a couple of times the stove would just shut off during baking.Beyond Repair
Eugene, OregonJenn-AirSVD48600P7601P510-60 100-775-00NONECONTROL PANEL HAS INPUT POWER BUT NO LIGHTED VALUES DISPLAYED. NOTHING INCLUDING CLOCKAwaiting receipt of timer
Tacoma, WashingtonJenn-AirSVD48600PWhirlpool OEM Part #5700M662-60N/ATimer display went dark. Once before this reset after unplugging the oven. This time it didn't work.Beyond Repair
Ajax, OntarioJenn-AirSVD48600PC71002959temp UP button not rtemp UP button does not respondAwaiting receipt of timer
Tacoma, WashingtonJenn-AirSVD48600PWhirlpool OEM Part #5700M662-60N/Aprevious timer failed, not repairableAwaiting receipt of timer
Green Cove Springs, FloridaJenn-AirSVD48600P71002959F3F3 error message when Bake button pressed. Temperature sensor and relay board replaced but did not correct problem.Repaired
Hopkinton, New HampshireJenn-AirSVD48600P5700m662-60F-1F-1 code will not stop beepingAwaiting receipt of timer
Bayfield, OntarioJenn-AirSVD48600PCPS2078136did not see oneeverything looks like it is working buttons all work says oven on goes to 100f but does not heat, same for the broil element everything appears normal but no heat.Repaired
Lac Supérieur, QuebecJenn-AirSVD48600PC5700m662-60N/AOven stop and screen turn off also after 5 min. We reset and still shut offAwaiting receipt of timer
Bogota, New JerseyJenn-AirSVD48600P71002959noneShuts off randomly, flashes shuts off at high tempRepaired
Nashville, TennesseeJenn-AirSVD48600PPS2078136n/aThe button in the timer is broken. The soft touch face that includes the button has ruptured.Awaiting receipt of timer
Billerica, MassachusettsJenn-AirSVD48600P5700M662-60 71002959 MaytagnoneMy Oven Timer is no longer working correctly, I press timer and timer function comes but when I press the up arrow nothing happens. When I select bake which starts at 350, the up arrow button does not work the temp does not change. The down arrow still works. It appears the up arrow button is broken, can this be repaired? The soft key is slightly more depressed than normal feels broken?Awaiting receipt of timer
Snohomish, WashingtonJenn-AirSVD48600P7601P510-60Rapid clicking relayStarted by oven not getting to set temp all the time then one day relay stated chattering. This timer was new old stock that I got a few years ago to replace the original that had F3 code after 30 minutes of use. Reinstalled that original and everything works as normal just get the F3 after 30 minutes or so.Beyond Repair
Carmel Valley, CaliforniaJenn-AirSVD48600P024-00173-05UnknownComplete failure of the range/oven electronic timerAwaiting receipt of timer
Belmont, MassachusettsJenn-AirSVD48600P71002959N/AHi, my oven's timer stopped working. Specifically The bake, convect bake, broil and clean buttons. I would like to replace it, new or used doesn't matter as long as it is functional and in a good condition. If it is not in stock I would like to have it replaced. Please advise on how to proceed.Awaiting receipt of timer
Calgary, AlbertaJenn-AirSVD48600PC71002959N/AJust purchased the oven. The former owner stated it was not working. He had a service technician out to diagnose the issue and indicated it was this control that was the issue.Repaired
Troy, North CarolinaJenn-AirSVD48600P5700M662-60F3F3 code oven doesn't reach set tempAwaiting receipt of timer
Nelson, British ColumbiaJenn-AirSVD48600PC7601P510-60noneCannot set above 350 degrees on bake setting.Repaired
Honesdale, PennsylvaniaJenn-AirSVD48600P5700M662-60N/AUNIT JUST GOES BLANK
COMES BACK ON, SOMETIMES QUICKLY
SOMETIMES AFTER AN HOUR
Repaired
Markham, OntarioJenn-AirSVD48600P5700M662-60F5 / F3Auxilary fan starts up and then F3 or F5 code comes up and stove turns off. Screen at times goes blank. This usually happens after 1/2 hour of the stove being on. Stove will not reach 350Repaired

Common problems for Jenn-Air SVD48600P Gas/Electric Slide In Range Timer

Are you encountering a similar problem as them? Contact us now and we will try to help you fix your SVD48600P timer-related problem.
I have a Jenn-Air oven, model # : SVD48600P. My wife was heating up the oven, she said it got "super hot" and came up with an "F2" error message and started beeping. She couldn't get the beeping to stop after repeatedly hitting the cancel button, finally she unplugged the oven and everything came to a halt. The oven was installed in 1999 and haven't had any problems until now. I found the error / fault codes and found 2 different repairs. First F2 code repair is : Oven too hot - Replace relay board (if present) or oven temperature sensor. Second F2 was for "Newer Style" oven range : Oven temp sensed; over 600F sensed by control in time of day mode, bake mode, or over 900F sensed in clean mode, Repair - Ohm test the oven temperature sensor, if ok, change power relay board. I've found the sensor in the oven(Ihaven't removed it yet oven still a little warm) and I have a meter, I am a DIY'er. Any all suggestions welcome, hope I gave enough info. thanks, XXXXX XXXXX
I have a jenn- air svd48600 series combination gas-electric grill-oven and oven, purchased in 1996. Display does not come on, oven cooling fan runs nearly all the time when oven is in use. Time to buy a new one, or is this good for a repair? Thanks for your help, Sue
I have a jenn-air svd48600p gas-electric grill-oven with convection oven and a f3 code any ideas how to clear it?
My Jenn-AIR SVD48600p electric oven stopped working. The front control panel that controls the oven is dark. The cook top gas burners, exhaust fan and oven light work. Circuit breakder has not tripped.
i have a jenn-air range, model svd48600p, the oven door stays open about a good 2-3 inches when looking at it from the side. i have replaced the hinges on it already no difference. i have checked the level & squareness of the outter frame, it seems fine, no obvious damage. i don't see any adjustment slots on the hinges or the mounting supports for the hinges on the frame. any suggestions would be helpful.
Fault Code F2 Jenn-Air Oven Model # XXXXXXXXX
WE HAVE A JENN AIR OVEN MODEL #SVD48600P THE HEATING ELEMENT BLEW AND HAS BEEN REPLACED BUT NOW THE CONTROL PANEL ISN'T WORKING. RELAY HAS BEEN REPLACED AS WELL. wHAT NEXT?
I have a Jenn-air 30" gas range model #SVD48600P. The door doesn't close the last 3/4". I ordered new hinges and replaced them. It seems there is not enough tension. Any ideas.
Hi, my Jenn Air slide in Electric Kitchen oven model # SVD48600P needs the Relay Board part # 71002144 replaced and this part number is no longer available. How do I find this part?
Jenn-air SVD48600P oven will not work / F3 error . I recently replace the expense control / clock unit on my oven because it would not heat. This was advice from repair person. Once replaced the over worked again, for about 10 minutes, and now there is an F3 error flashing and the internal fan will start running for absolutely no reason. With only 4 days until Christmas dinner, I'm running out of time...
Hi. I have a Y-2K Jenn-Air Electric Oven, with a gas cooktop. Model#SVD48600. The other day we finally got the clean mode to work-- didn't realize we had to push the oven door for the lock to engage. After the cleaning was completed, the F2 error light came on. The fan kept running, and the lock would not disengage. Eventually the lock disengaged, and the fan shut off. However, the next morning the fan spontaneously came back on, and stayed on until yesterday, mid afternoon. This morning, the fan spontaneously came back on, and the F2 error came up again. In spite of repeated attempts to click the cancel/off button, the F2 would repeatedly come back on. I eventually unplugged the plug from the power supply, and am now ready to "dig in" to see what I need to fix it. According to the schematic, the F2 error is an Ohm Sensor. If the resistances do not match, I should either replace the sensor, or the whole relay board. Your helps would be appreciated in my troubleshooting. 1- I am not an
Try here for the manual Download SVD48600.pdf
I have a Jenn-Air Electric oven that the oven elements wont work. I replaced the oven sensor today and it did have some heat damage on the wiring adaptor. However, there is no change. I have tried bake, broil and clean and none work. Sometimes it will flash a F5 code but not always. Most times, it will show that "preheat" is on but never heat up. I have inspected the upper and lower heating elements but found nothing obvious. Everything else works fine.
Original problem...oven cooling fan running by itself and when Bake or Broil selected....doesn't work....did tests with Stop Key....now F3 displays....it says that ohm sensor should be checked...not sure what part that they are talking about I have replaced clock ( main circuit board) but to no avail...
My clock works but it does not beep anymore when time has expired. Any idea what the problem may be or what part I need to order?
My Jenn-Air range is having problems with the control panel. The only button that doesn't work is the up arrow. The rest of the control panel works fine. I am assuming that this was the first button to go since I use the up arrow the most. Does the whole control panel need to be replaced, or is there something that can be done to fix the up arrow? I cannot use the clock and can only bake up to 350 degrees w/out the up arrow. I would really like to avoid having to pay around $400 for a new control panel and the labor to repair it.
Both upper and lower oven elements won't heat beyond warm (100 degrees)Jenn-Air Model# SVD48600P
my oven isn't getting warm...what to do, everything else seems to be working.model # SVD48600P
element burn out bottom jennair range element burn out bottom range jennair SVD48600p repain man replaced element and main board with clock range still would not work but he did not know what else could be problem
I can't lock the oven door to perform self cleaning. I there a handle to manually lock door? or is there just a problem with the door latch assembly