- About Us
- Repair Services
- Request Service
- Contact Us
Frigidaire CPLEF398CCB Electric Range Timer
What is the timer/clock part number for the Frigidaire CPLEF398CCB Electric Range?
The CPLEF398CCB Electric Range uses timer part number 316207600.
Do you have a failed Frigidaire CPLEF398CCB control panel? Click here:
We can repair or replace your faulty Frigidaire CPLEF398CCB timer.
CPLEF398CCB are also sometimes referred to using these Alternative Names/Model numbers
Electrolux CPLEF398CCB Electric Range, CPLEF398DCL, CPLEF398DCH, CPLEF398DCK, CPLEF398DCJ, CPLEF398DCE, CPLEF398DCD
CPLEF398CCB Schematic and Wiring Diagrams
Recent Service Requests
Common problems for Frigidaire CPLEF398CCB Electric Range Timer
Are you encountering a similar problem as them? Contact us now and we will try to help you fix your CPLEF398CCB timer-related problem.
i have a frigidaire cplef398ccb range, the oven does not heat up. everything else looks like it works fine
electronic range model # XXXXX serial number vf31936088 When I used the large front right element I realised during the setting at 2.4 the small element was red all the time I put the setting to OFF and the element still RED. don't want to stop... I must go to the breaker box to stop it.
Hell, I have an Electric oven ES400 controls...model #CPLEF398CCB, and the front right hand burn is stuck on high. I have to unplug it... can you help me please???
i am getting an error code "oc" on my display panel on my Frigidaire electric range. model number Cplef398ccb. It was in the cooking stage and then the power tripped from the main board and when i went to turn the unit back on it beeped. i hit clear and kept showing 'oc' oven top works find but i cannot press any buttons on the display for the oven. . . any suggestions?
Hi there, I have a Frigidaire electric oven model # XXXXX The range top works, but the oven/convection does not work at all! We have replaced the burners but that didn't work! Please help :)
I have a Frigidaire range Model # XXXXX While using range and rangetop heard a popping noise and the control pad is now off. The rangetop still works but the oven doesn't as the contol pad is inoperable. Is there an internal fuse that I can check, or what might be the problem.
model#CPLEF398CCB electric oven problem-right hand front element (dual surface radiant element)large element works on/off with dial.small element does not shut off at all.(shut off breaker) is this a result of a potentiometer control (dual) or hot surface sence switch or P12 power board or surface indicator or power board. could you please reply to me by e-mail thx XXX@XXXXXX.XXX
Frigidaire cplef398ccb Flashing F7 Re my Frigidaire cplef398ccb oven, it clicks whenever I touch the door sounds like relays clicking. Would that indicate the EDC needs replacing, I don't want to replace the wrong part.
F7 code and beeping I have a problem with my Frigidaire cplef398ccb range beeping and showing a F7 code.
So, I am cooking dinner on oven up top, and decide to add some bread below, so I preheat the oven, the clock counts down, but starts disapearing and coming back.... oven does not heat up....later I pulled the Oven out and notice the power cord barely in, so I plug it in, hoping that's the issue, still no heat up, clock clock, top range work fine, I don't have any kitchen power out, so no fuse is out, is there something I can check on this oven without having to call out a repairman... could it be the heating elements (both do not warm) or something else? any help would be appreciated!
Frigidaire cplef398ccb Flashing F7 My oven clicks when I touch the door, it sounds like relays clicking. Would that indicate that it is the EDC that needs replacing, I had origanally thought it was the EOC? Thanks
Programming a 2006 Pontiac Gran Prix Keyless remote I just need the programming instructions of a GM/L:22733523
I have a Frigidaire oven Model CPLEF398CCB. My daughter was baking muffins and it went stopped. The whole panel doesn't indicdate. When I turn an element on it indicates an F6 error. From my research Version 1 says replace EDC, Version 2 through 4 says replace EOC. I assume that EOC, sans for Eletronic Oven Control, but not sure what EDC is. Your help and possible part numbers would be appreciated. thanks, Brent
How people are finding this page