Frigidaire CFES387CFS5 Timer Repair

What is the timer/clock part number for the Frigidaire CFES387CFS5 Range?

Timer part number 318012928 for Frigidaire CFES387CFS5

The CFES387CFS5 Range uses timer part number 318012928.

Do you have a failed Frigidaire CFES387CFS5 control panel? Click here:

Request Appliance Timer Service

We can repair or replace your faulty Frigidaire CFES387CFS5 timer.

CFES387CFS5 are also sometimes referred to using these Alternative Names/Model numbers

Electrolux CFES387CFS5 Range

Recent Service Requests

CityProblem DescriptionResolution
Iona station, OntarioVery very dim digital displayAwaiting receipt of timer
Laval, QuebecOven does not work but stove and display are fine.Repaired
Calgary, AlbertaHappy of your repairs on the first unit which I have got today.
Now I am sending the second unit which has been working for 15 years but F1 error sporadically shown up (temperature sensor is OK).
-Finally the oven has stopped work ( baking and convection functions).
-Visible reducing of the display brightness
Repaired
Calgary, AlbertaDigital clock doesn't work. Black display.
All oven functions don't work as well
Repaired
Saint-Jean-sur-Richelieu, QuebecNothing on display.
Stove top is functional (with timer in place or removed).
Repaired
Dartmouth, Nova ScotiaAlways has dim, barely readable display in red LED segment sections. Blue segments aren't as good as when the stove was first purchased but they are much better than the red ones.

I have been getting by with it so far by noting that the timer starts at 350F and that the temperature changes by 5F each time I tap the raise or lower button. I am able to see that there is a change even though I can't read the value so pressing UP 5 times gets me to 375F for example.

The timer works well otherwise.

I removed the timer and disassembled it to get access to the circuit boards. I determined that the various DC voltage sources 5V, 12V and 24V are strong and that the capacitors are OK. That's as far as I can take it and I am told this is a fairly straight forward repair so I would like this done if possible.

I would also like to have any parts that are removed to be placed in the small plastic bag that I have sent with the timer. I want to understand what the issues are with things that break so I can be prepared the next time this happens and having access to the faulty parts will help. At some point I will simply have to replace the whole stove.
Repaired
Dartmouth, Nova ScotiaAlways has dim, barely readable display. Poor segment illumination. Works well otherwise. I am told this is a fairly straight forward repair so I would like this done.Repaired
Arnprior, Ontario-lower oven element will not heat-up during oven warm-up
-element OK (continuity test 19 Ohms)
-stove top functions fine
-wiring checked OK
Repaired
Belleville, OntarioBottom element not workingRepaired
Mississauga, OntarioBeeps and turns off when using ovenAwaiting receipt of timer
Keswck, OntarioDigital display for the oven functions in red are very dim. Also there must be a bad solder joint as sometimes we have to tap it to get it to work.Repaired
Toronto, OntarioSimply want to replace cracked face and illuminated electronic plate so numbers will be visible once again. Do you folks have a new or refurbished unit. Could you send a pic and I would gladly purchase.
Thank you
Awaiting receipt of timer
Pickering, Ontariodead - no screen display

oven won't heat up
Awaiting receipt of timer
Halifax, Nova ScotiaDisplay blank. Stove top elements work fine.Awaiting receipt of timer
Edmonton, AlbertaLower Oven Element and Convection Oven not working. everything else is fine.Repaired
Peachland, British ColumbiaLower oven heater element not working. The element was tested and it is still good.Awaiting receipt of timer
Mascarene, New BrunswickConvection oven would work normally.
Regular oven would not heat to set temperature. It appeared that lower element wasn't working.
Also, illuminated control reading was very dim, becoming almost unreadable.
Repaired
Mascarene, New BrunswickConvection oven would work normally.
Regular oven would not heat to set temperature. It appeared that lower element wasn't working.
Also, illuminated control reading was very dim, becoming almost unreadable.
Repaired
Welland, OntarioOven will not reach desired temperature above 200 degrees.Repaired
Guelph, Ontariotemperature number can not be seen.dimmed,Awaiting receipt of timer

Common problems for Frigidaire CFES387CFS5 Timer Repair

Are you encountering a similar problem as them? Contact us now and we will try to help you fix your CFES387CFS5 timer-related problem.
Is there any way I could clean the glass that in the middle of the oven door?
I have an frigidaire gallery range/oven. The digital read out for the oven temperture is almost impossible to read as it is very very dull. What can I do to be able to view the tempertaure reading easier? Thank you Andrea