|Sanford, Maine||Amana||ARGS7650WW||31944801||No power to unit||At first, when oven was turned on, unit lost power and reset.|
Now, unit has no power to it.
|Bellingham, Washington||Amana||ARGS7650WW||31944801||none||Oven will operate fine then sometimes the oven will go off and the clock will start blinking. The only thing on the controller blinking is the time, everything else is dark.|
We are able to restart the oven. It may work fine for a day or a month until it happens again.
|Santa Fe, New Mexico||Amana||ARGS7650WW||31944801||N/A||No Digital Display||Awaiting receipt of timer|
|North Vancouver, British Columbia||Amana||ARGS7650WW||Maytag 31944801||N/A||Oven will not maintain temperature during baking. Warms up initially but will not re-ignite gas once oven cools during baking cycle.||Repaired|
|Shapleigh, Maine||Amana||ARGS7650WW||AP4041311||N/A||Oven does not reach temp.||Replaced with reconditioned timer|
|London, Ontario||Amana||ARGS7650WW||31944801||N/A||After a baking session , the timer blacks out (loses power) for 2-5 minutes, then comes back on.|
From past experience ( we're on the second timer) we know this will get worse.
|Boulder, Colorado||Amana||ARGS7650WW||31944801||f1 f3 f?||Oven often turns itself off.||Replaced with reconditioned timer|
|Sand Springs, Oklahoma||Amana||ARGS7650WW||31944801||F5||We had a lightning strike in vicinity that damaged several items in the house that had electronic circuit boards. Routers, garage door openers, TV, electronic range control, etc. The ERC was giving an F5 code, which according to the manual is a “control malfunction”. I have sent the board in to one of your competitors and they have been unable to fix the problem. The ERC has 3 connectors, the J4 connector (power to the board), the J5 connector (igniters for bake/broil), and the J2 connector (temp sensor and door lock switch). I have plugged in the 3 connectors sequentially (J4, J5, J2) and the F5 code only appears after the J5 connector is plugged in. This leads one to suspect that the temp sensor or the door lock switch is the problem. However, the temp sensor reads 1080 Ohm at room temp and the door lock switch has continuity across the proper terminals. In addition, when the F5 code is present, you can put ERC in “Bake” mode and the oven will turn on, come up to set temp, and cycle the gas on/off to maintain temp. It is only when the ERC is not in “Bake” mode that the F5 code returns. It appears to me that the temp sensor and door lock switch is fine. The temp sensor read about 1580 Ohm a few minutes after the oven was warmed to 350F and then turned off.||Repaired|
|brooklyn, New York||Amana||ARGS7650WW||31944801||none||Turns off intermittently. Returns with blinking time.||Awaiting receipt of timer|
|Ardsley, New York||Amana||ARGS7650WW||31944801||?||Everything on the digital panel has stopped working - clock , all selections on touch pad.||Awaiting receipt of timer|
|Eugene, Oregon||Amana||ARGS7650WW||?||n/a||Clock sometimes blinks.|
Clock is sometimes completely blank, and control panel is unresponsive.
Oven sometimes shuts off during cooking.
Usually, it works fine, but malfunctions are becoming more frequent.
|VILLE PLATTE, Louisiana||Amana||ARGS7650WW||AP4041311||N/A||OVEN WILL NOT TURN OFF. BROILER WILL NOT TURN OFF. I CAN SEE A BURN SPOT ON THE UPEER LEFT CORNER OF THE DISPLAY.||Repaired|
|Portland, Oregon||Amana||ARGS7650WW||053-00131-00||N/A||Dead. Power to unit but no display. No Clock, timer, oven contorol etc.||Repaired|
|Peterborough, Ontario||Amana||ARGS7650WW||31-315569-87-0||N/A||dead - does not show anything on screen||Beyond Repair|
|WENTZVILLE, Missouri||Amana||ARGS7650WW (BOM: P1130755NWW)||Y0315569 (found on internet Amana parts list)||NO CODES; DISPLAY BL||after a power failure the display was out and the oven would not work.|
There was 120 VAC at J4 on the circuit card.
|Awaiting receipt of timer|
|Woodbridge, Virginia||Amana||ARGS7650WW||31-315569-07-8||N/A||The male part of some of the buttons are broken and face plate of the unit does not stay connected to the back half, tabs are all broken off.||Awaiting receipt of timer|
|Morpeth, Ontario||Amana||ARGS7650WW||31944801||Oven Broil not respo||Oven Clean and Broiler and Bake are not responding |
Along with Temp Settings not working Could be Relay's ?
|North Caldwell, New Jersey||Amana||ARGS7650WW||AP4041311.||F3||F3 error happens at any point before the oven reaches 350. will not stay on longer then 10 minutes. Replaced heating element and thermostat twice still issue continues. Service tech says we need a new electronic control panel for the oven. will this part work? How much will it cost.||Awaiting receipt of timer|
|North Caldwell, New Jersey||Amana||ARGS7650WW||31944801, 053-00131-00||F3||F3 error happens at any point before the oven reaches 350. will not stay on longer then 10 minutes. Replaced heating element and thermostat twice still issue continues. Service tech says we need a new electronic control panel for the oven. will this part work? How much will it cost.||Awaiting receipt of timer|
|Burr Ridge, Illinois||Amana||ARGS7650WW||31944801||F3||F3 alarm intermittently||Repaired|