WB19X269 General Electric Range (Oven, Stove) Timer Repair |
Failure codes, problems, and resolutions for General Electric timer model # WB19X269 |
![General Electric (GE) ERCs and General Electric (GE) stove clocks and timers]() |
Manufacturer : |
General Electric |
| Part Number : |
WB19X269 |
| Appliance Type : |
Range (Oven, Stove) |
| Color : |
|
| Description : |
Clock/Oven Control |
|
Do you have a failed General Electric WB19X269 timer?
Click here:
We can repair or replace your faulty WB19X269 timer. |
![Request Appliance Timer Service]() |
Recent Service Requests for General Electric Part Number WB19X269| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| San Jose, California | JSP28G0N1BG | F1 | The connection from the timer to the Broiler seems to be the problem, as everything else works. I even tried buying a new broiler element. The timer beeps after using the stove top or oven, if it gets warm near the timer. Occasionally, the timer beeps when we are not even using the appliance. | Awaiting receipt of timer | | Cupertino, California | JSP38GN28G | N/A | f1 &F7 ERROR CODE | Awaiting receipt of timer | | Traverse City, Michigan | JSP26G0N2WH | sometimes F1 | Hello,
The stove is not heating the bottom oven coil nor is it heating the broiler. I do not remember seeing F1 yesterday when I took it apart, but there has been an intermittent F1 in the past. | Repaired | | Loyal, Wisconsin | JSP28G0N1BG | F1 | F1 beeps | Awaiting receipt of timer | | Rochester, Minnesota | JDP37GOL8BG | F1 | Shortly after running the self cleaning mode on our oven/range for the first time, the display started going dim from time to time. It would come back sometimes if you lightly tapped on the display. Some time later the display went to -F1- and the controller started beeping incessantly.
Following is the complete debug history: I have a GE drop in range, Model # JDP37GOL8BG, Serial # RD405153Q. It started beeping and displayed -F1- on the display. I can clear the -F1- display and stop the beeping by pressing the 'Cancel' button, however, after 15 seconds it displays -F1- again and starts beeping all over again. I replaced the keypad and the electronic controller, because that is what was suggested in online error code tables. I installed the new keypad/controller, and operation is the same. The only way I can get it to stop beeping is if I stand there and keep hitting the 'Cancel' button, or, after hitting the 'Cancel' button, I turn on the oven. It then doesn't beep, however, the oven doesn't warm and the temperature indicator sits at 100 degrees, the lowest temperature indication. The time of day clock keeps time. I have also replaced the temperature senser (in the oven) since the oven wasn't heating, with no effect; both the old and new temperature sensers measure 1.09 kohm at room temperature. The top and bottom heating elements worked fine prior to the -F1- display/beeping issue. I have looked at the wiring and there is no indication of heat, age, or shorting. Since I don't have a wiring diagram, I don't know what additional troubleshooting I can perform, or if I could have received a bad keypad/controller. The keypad/controller I am sending is the one original to our range/oven. | Repaired | | Panama City, Florida | JDP37GOL9BG | display cuts out | display cuts out, or fades intermittantly. | Timer inspected, no repairs necessary | | Dayton, Ohio | JSP28GON1BG | F-1 | will not lock for cleaning , lights diming, F-1 code, beeping after cooking | Awaiting receipt of timer | | Soddy Daisy, Tennessee | JSP26G0N1 | N/A | When selecting bake temp, L2 relay will pull in then drop back out. Bake display will then shut off. Same with Broil.
This is a reconditioned oven module under warranty. | Beyond Repair | | Kincardine, Ontario | JSP31 | F1 | Turn the oven on and it would shut off about 5 times before the oven finally turn on. Then a F1 error would come on and a beeping. Had to open the breaker to get it to cancel. | Repaired | | North Easton, Massachusetts | JSP28G0N1BG | F 1 | WILL RANDOMLY BEEP & FLASH - F 1- (EVEN WHEN NOT IN USE) ALSO THE CLOCK (WHOLE DISPLAY FADES) CUST HAS TO TURN ON (AND OFF) THE KNOB FOR THE RIGHT FRONT BURNER TO SEE THE DISPLAY WHEN SETTING FOR BAKE. SOMETIMES WHEN CANCEL IT HIT SEVERAL TIMES THE DISPLAY WILL RE APPEAR. THAT PARTICULAR PROBLEM IS INTERMITTENT. | Awaiting receipt of timer | | Knoxville, Tennessee | jsp28g0n1bg | f1 | error code f-1 | Replaced with reconditioned timer | | Newport, Washington | JSP26GON2AD | F1 | Continous F1, cannot reset, Oven, broiler do not work | Awaiting receipt of timer | | Acworth, Georgia | JSP31GON1WH | F2 F3 | You repaired my Electronic Range/Oven Controller. Inv#102230 2/15/2011
It was reinstalled and worked fine until yesterday. When trying to preheat oven, it goes into F2 or F3 error codes.
This repair should be covered under your one year warranty. | Beyond Repair | | Acworth, Georgia | JSP31GON1WH | F2 & F3 | Problem was intermittent, but now get an F3 when trying to use oven. Digital clock display has gone dark, but will ocassionally briefly come on. Knob to adjust temp is very twitchy. | Repaired |
|
|
