318010701 Frigidaire/Electrolux/Kenmore Range/Stove/Oven Timer Repair

DESKTOP Failure codes, problems, and resolutions for Frigidaire/Electrolux/Kenmore timer model # 318010701

Frigidaire ERCs and Frigidaire stove clocks and timersElectrolux ERCs and Electrolux stove clocks and timersKenmore ERCs and Kenmore stove clocks and timers Manufacturer :  Frigidaire/Electrolux/Kenmore
Part Number :  318010701
Appliance Type :  Range/Stove/Oven
Color :  Black
Description :  Clock/Timer,Eoc

 
 
Do you have a failed Frigidaire/Electrolux/Kenmore 318010701 timer?
Click here:

We can repair or replace your faulty 318010701 timer.
Request Appliance Timer Service

Recent Service Requests for Frigidaire/Electrolux/Kenmore Part Number 318010701

CityModel NumberFailure CodeProblem DescriptionResolution
Teulon, Manitobacgeb27s7cs1NoneNo bake element or convection element heat. Broil operates as normal.Repaired
Val d'Or, QuebecCGEB27S7CB2F-3It beeps with an F-3 codeRepaired
St. George, New BrunswickCFEB789JGS1no codeThe customer is wondering if you stock any of these reconditioned oven controls.
The display is very dim and difficult to read. If you do not have any stock would you be able to replace this display module?
Repaired
Greely, Ontariocfeb389wec7no displayNote: I had this control panel repaired because of no display however when I tried it, oven and broiler would not turn on. I have a backup panel which is very dim, however, oven and broiler work with that panel.Awaiting receipt of timer
Greely, Ontariocfeb389wec7no displayNote: I had this control panel repaired because of no display however when I tried it, oven and broiler would not turn on. I have a backup panel which is very dim, however, oven and broiler work with that panel.Awaiting receipt of timer
Spruce Grove, AlbertaCPEB30S8cc2no codethe timer face is blankRepaired
Regina, SaskatchewanCGEB27S7CB2N/AOven won't reach set temperature. Element heats up and then shuts off.Repaired
Greely, Ontariocfeb389wec7no displayNote: I had this control panel repaired because of no display however when I tried it, oven and broiler would not turn on. I have a backup panel which is very dim, however, oven and broiler work with that panel. - REPAIR UNDER WARRANTYAwaiting receipt of timer
Salaberry-de-Valleyfield, QuebecCGEB27S7CB1F1Problem started as oven was functionning for over 1 hour. It stopped heating and start locking the door. Cancel button wouldn't do anything. I shut off the breakers and when I restarted the oven, it worked for 5 minutes and now code F-1 appears with intermittent alarm on and off.Awaiting receipt of timer
Halifax, Nova ScotiaCFEB386JGB2BAKE ELEMENT NOT WORBAKE ELEMENT WAS TESTED BY A TEC HAS 120VOLTS ON ONEE SIDE NOT 240 VOLTSRepaired
Calgary, AlbertaCPEB30S8CC2noneNo work of heating all.
convection fen was work.
Awaiting receipt of timer
Halifax, Nova ScotiaCFEB386JGB2bake element not comBake element will not come on, had it diagnosed and they told me the part was no longer available. did it was the clock timer a relay was not working. Also we noticed over the last year the clock is not as bright and flickers from time to time.Repaired
Calgary, AlbertaCPEB30S8CC2noneNo work of heating all.
convection fen was work.
Awaiting receipt of timer
Sussex, New BrunswickCGEB27S7AS1noneDisplay is dim. Do you have a replacement either new or used?Awaiting receipt of timer
montreal, QuebecCGEB30S8CS1n/aAll off - electricity arrives at Control board (timer) but oven gives zero sign of life...Awaiting receipt of timer
Gatineau, QuebecCGEB27S7AB1Does not respond to The oven would shut off after a certain time so I replaced the electrolytic capacitors (6) on the 2 interconnecte circuit boards that make up the control module. After that, the module would not respond to switches on the control panel. I repaired the flat cable from the switches which had lost contact inside the connector (Crimpflex), 5 connections. Still, the display kept on flashing the time of day but no response from the switches. So now I suspect the control module. Maybe the proprietary Robert Shaw chip?Repaired
Sherwood Park, AlbertaCFEB786JGB2F3Replaced temp probe, still gives F3 fault intermittently.Repaired
Sherwood Park, AlbertaCfeb786jgs2F1-f3Beeps f1_f3 codes temp light only shows 1/2 screenRepaired
Fisherville, OntarioCGEB27S7CS2n/athe clock is on, it will accept commands but nothing works. I had my local appliance repair person check over the oven and he said this was the problem
BTW do your longer warranties include shipping?
Repaired
Nakusp, British ColumbiaCGEB27S7CB2No displayWas cooking and heard a pop, then the display of my oven turned off. I checked the circuit breaker and it was still on. The oven light still functions, just the display no longer lights up and I can no longer use the oven as a result.Awaiting receipt of timer