WB12K0005 General Electric (GE)/Kenmore Range (Stove, Oven) Timer

Failure codes, problems, and resolutions for General Electric (GE)/Kenmore timer model # WB12K0005

General Electric (GE) ERCs and General Electric (GE) stove clocks and timersKenmore ERCs and Kenmore stove clocks and timers Manufacturer :  General Electric (GE)/Kenmore
Part Number :  WB12K0005
Appliance Type :  Range (Stove, Oven)
Color : 
Description :  Electronic oven control assembly the manufacturer has replaced part number WB12K5 replaced with WB27T10083

 
 
Do you have a failed General Electric (GE)/Kenmore WB12K0005 timer?
Click here:

We can repair or replace your faulty WB12K0005 timer.
Request Appliance Timer Service

Recent Service Requests


CityManufacturerModel NumberPart NumberFailure CodeProblem DescriptionResolution
Dalton City, IllinoisKenmore362.75875691wb12K0005N/Aecr screen is a garbled mess... no codes present... just every led in the ecr is on...Awaiting receipt of timer
COOPER, TexasKenmore362.7361193WB12K0005N/AWILL NOT HEAT THE OVEN HOT . CUTS OFF ABOUT 100 DEGREES TO SOONAwaiting receipt of timer
Avon, OhioKenmore3627361190WB12K0005N/A"Clean", "Broil" and "Bake" functions no longer work at all. The remaining ERC functions do work though. I disconnected/re-connected the lead-in wires but the symptoms still persist. Please repair the three aforementioned ERC functions, if you can.

Thank You,

Alan Smolen
440-759-2485 (m)
Beyond Repair
Dallas, TexasGeneral ElectricGE XL44WB12K0005N/AThis range has been in storage for a few years. It was working fine before. Now that I am trying to use it again, it powered up for about two minutes, then it failed. It just went dark. The light inside the oven works fine. There is voltage to the timer itself. Looks that there must be a circuit that is not working in the timer itself. If you have one in stock, I would prefer to have that one, simply because Thanksgiving is looming. Otherwise, I suppose I will have to wait for this one to be be rebuilt.Repaired
Pittsburgh, PennsylvaniaKenmoreWb12k0005N/AF1 error code. Not clearableAwaiting receipt of timer
Avon, OhioKenmore3627361190WB12K0005N/AERC is malfunctioning and needs to be replaced. Oven temperature displayed and set by ERC is not actual, recorded (via oven thermometer) temperature. Actual temperature is 200 degrees(f) below that on ERC. Oven sensor and ignitor have already been replaced.Replaced with reconditioned timer
Litchfield, MinnesotaKenmore362.7361991WB12K0005N/AThe oven lower temp. control (down arrow) does not lower the oven temp. when pushing the down arrow. Up arrow works, down arrow does not work.Repaired
columbia city, IndianaSears362.7361190wb12k0005N/Atemp. calibration offAwaiting receipt of timer
SIGNAL MOUNTAIN, TennesseeKenmore362.7361890WB12K0005F-1FLASHES F1 CODE AND NOTHING WORK
RANGE TOP WORKS BECAUSE IT IS GAS MUST BE LIT BY HAND
Repaired
Mississauga, OntarioGeneral ElectricJGBP35WEV4WWWB12K0005noneOven not workingRepaired
McKinleyville, CaliforniaKenmore362.7586591WB12K0005N/ATimer Works fine.

Oven Controller flashes random temperatures - Bake and Broil lights are on simultaneously- will only settle at 335 degrees on controller - no adjustment is possible - actual oven temperatue is 300 degrees.
Repaired
Jackson, New JerseyGeneral ElectricXL44wb12k0005N/AI have a GE XL44 model: JGBP35WEW1WW White Gas Range. The display has stopped working. I would like to replace the part if possible.

Please let me know if you have this part in stock. New or Referbished doesnt matter.

Thanks
Replaced with reconditioned timer
Independence, MissouriKenmore362 7351190WB12K0005N/Athe oven temps and timer numbers work intermittently, most of the time very faded unable to readAwaiting receipt of timer
East Rockaway, New YorkGeneral Electricxl44WB12K0005N/AWill not opereate-Awaiting receipt of timer
Santa Maria, CaliforniaKenmore362.7361890WB12K0005none displayedOven does not maintain setting temperature. Replaced ignitor and senor. Still have same problemRepaired
Fleming Island, FloridaGeneral ElectricGBP34GEP3ADwb12K0005F1Cannot clear the F1 codeAwaiting receipt of timer
Roselle, IllinoisGeneral ElectricWB12K0005F1It would beep then code F1 would appear and not go offRepaired
Oakland Gardens, New YorkGeneral ElectricJGBP34GEP1WB12K0005no current to bake oWhen engaged, the screen defaults to 100 degrees on bake, then after a few seconds,
The temperature section goes blank. This occurs on both bake and broil
Awaiting receipt of timer
colchester, VermontGeneral ElectricJGBP34WEV3WHWB12K0005N/AOven won't go above 100.Awaiting receipt of timer
Peterborough, OntarioGeneral ElectricJGBP35WEV4WWWB12K0005N/AWHEN SETTING THE OVEN TEMPERATURE THE OVEN STARTS UP FINE. AFTER IT IS ON FOR A WHILE IT SHUTS ITSELF OFF. THERE IS NO SET TIME PATTERN BEFORE IT SHUTS ITSELF OFF. AFTER IT SHUTS ITSELF OFF AT TIMES IT WILL COME BACK ON OR IT WILL DISPLAY "DOOR" ON THE TIMER. IF WE WAIT AWHILE WE CAN START IT UP AGAIN BUT THE SAME PROBLEMS APPEAR IN TIME. I HAVE NOTICED SOME CRACKS ON THE OVERLAY BUTTONS BUT I DO NOT KNOW IF THAT IS CREATING THESE PROBLEMS.Repaired
Canton, MississippiKenmore362.75970690WB12K0005None/BlankThe module is blank and unresponsiveRepaired
Aurora, IndianaGeneral ElectricJGBP34GEP1wb12k0005N/AOven baking temperature is always about 60 to 75 degrees F to cold. This is after having tried calibrating the display to heat up to 35 degrees hotter. It does help, but no where near needed.

Unsure if the Control panel is the problem. Below are the various tests I've done on other components.

Oven Sensor tests ok. At 1,065 Ohms of resistence
Gas igniter (round variety) seems to be working ok, pulling 3.0 - 3.3 Amps when lighting, and glowing a nice bright orange, almost white colored.
Gas safety valve seems to be ok, testing at 1 -2 Ohms of resistence. And lighting fairly quickly, withing 3-5 seconds of valve opening.

The only other thing I can think of, is somehow setting the baking burner to flow more gas, burning hotter, but I don't know how. And even so, if the thermostat still reads the temperature too low, burning hotter probably wouldn't help, as it will just shut off sooner .

Any help you could give would be much appreciated.

God Bless,
Daniel Clem
Awaiting receipt of timer
CHERRY TREE, PennsylvaniaKenmore362 75970690wb12k0005doorWHEN YOU PUSH THE BAKE IT PUTS THE WORD DOOR AND THE OR IS DIM THE CLEAR BUTTON OK.I NEED ALSO AN OVERLAY FOR IT.
THANK YOU.
Awaiting receipt of timer
Keedysville, MarylandKenmore362.75970691WB12K0005No fault codeTemperature fluctuates / have already replaced sensorRepaired
Davisburg, MichiganGeneral ElectricJGBP35WEV4WWWB12K0005NoneTimer makes a high pitched squealing noise. It is constant, but all functions of the timer/controls work.Repaired
CHERRY TREE, PennsylvaniaKenmore362 75970690wb12k0005doorWHEN YOU PUSH THE BAKE IT PUTS THE WORD DOOR AND THE OR IS DIM THE CLEAR BUTTON OK.I NEED ALSO AN OVERLAY FOR IT.
THANK YOU.
Awaiting receipt of timer
Fort Collins, ColoradoKenmore362.75970690WB12K0005F2,F3,F5 at differenOven temperature rises part way and then we have an error code with beeps. Oven temperature rises to set level works for a while then has an air code with beeps. Once while the stove and wasn't being used we experienced in air code and beeps. The broiler seems to work.Repaired
Fort Collins, ColoradoKenmore362.75970690WB12K0005F2,F3,F5 at differenOven temperature rises part way and then we have an error code with beeps. Oven temperature rises to set level works for a while then has an error code with beeps. Once while the stove and wasn't being used we experienced in error code and beeps. The broiler seems to work.Repaired
Madison, OhioKenmore362.75875691WB12K0005noneDim clock, timer works fineAwaiting receipt of timer