General Electric Gas Range JGBP34GEP3 Timer Repair

What is the timer/clock part number for the General Electric JGBP34GEP3 Gas Range?

Timer part number WB12K10 / WB27T10083 for General Electric JGBP34GEP3

The JGBP34GEP3 Gas Range uses timer part number WB12K10 / WB27T10083.

Do you have a failed General Electric JGBP34GEP3 control panel? Click here:

We can repair or replace your faulty General Electric JGBP34GEP3 timer.

JGBP34GEP3 are also sometimes referred to using these Alternative Names/Model numbers

GE JGBP34GEP3 Gas Range

JGBP34GEP3 Schematic and Wiring Diagrams

Cabinet Parts diagram

Burner assembly Parts diagram

Door and drawer Parts diagram

Control and cooktop Parts diagram

Recent Service Requests

City	Problem Description	Resolution
Auburn, Washington	Oven & Broiler relays will not activate. Was intermittent but now a hard failure. All other functions work (clock, timer,etc.) Checked both ignitiors & gas safety valve all ok.	Repaired
Peoria, Illinois	Bake, broil, & oven clean cycles shut off after a few seconds of the cycle starting as if they were never turned on. None of these will stay on. The oven does not heat because of the cycle turning off after a few seconds of being on.	Repaired
South Bend, Indiana	Beeping and flashing F-1 code	Awaiting receipt of timer
Camanche, Iowa	We unplugged the range to install new floor tile and when we plugged it back in the F1 code appeared and it beeped. We have unplugged & plugged it back in and it still does the same thing. We have tried setting the clock and after the clock is set the F1 comes back up in the window and it beeps again.	Awaiting receipt of timer
South Holland, Illinois	BAKE AND BROIL BUTTONS DO NOT WORK	Repaired
Fontana, California	F1 Code displayed, and loud beeping noise.	Awaiting receipt of timer
Canton, Michigan	Flashing an F-code. No ele ignition on burners. Clock, oven, all not working.	Repaired
Seattle, Washington	Failed after power outage caused by downed tree. Neighbor reported lots of sparking.	Repaired

Common problems for General Electric Gas Range JGBP34GEP3 Timer Repair

Are you encountering a similar problem as them? Contact us now and we will try to help you fix your JGBP34GEP3 timer-related problem.

I purchased the control board from app parts pro and the board that I received is different than the one that is on the range. On the control board the four wires that connect up are in a straight line, red-li, white-NEU, blue-bake, yellow-bake. Now the control board that I received, the hookups are not in a straight line, they are all over the board and they read, line,bake,broil and R1Y101 next to it or AC N on the bottom of the connection. They tell me at app parts pro that it is the board that their records say to use. Is This board compatible? I do not want to hook it up till I know it is.

We inherited this range from the previous owners. I have not figured out how to use the timed-baked function. We use the baked function and every few months the oven stops working until I stand in front of it playing with the three dials( clock, stop time, delayed start time) untill it comes back on. I've tried everything. I give up.

I have a GE gas oven model #jgbp34gep" serial # XXXXX I am an ex services guy. I checked the service book because I was getting an F2 or F4 fault code. I checked the resistor at the ERC and it 1117 ohms. All else checked out as per the services book. What is your next suggestion?